107 Series Municipal Style Hydraulic Pipeline Flushers Sizes: 3" to 12"
| Petersen Drain Flushers open clogged drains with powerful jet action and high flow rate. Easy to install even around bends and elbows. Much greater flow rate than rubber bulb-type flushers that require much of the pressure just to expand the rubber. DrainJet™ Hydraulic Drain Flusher puts all the water flow and pressure to work. The 100 to 102 Series have a 3/4" garden hose connection. The 103-Series have a NPT connection for use with your power Jetter and can double as a pipe plug (simply put a pipe plug in the outlet end, inflate up to 100 psi (60 psi for 6"), and use as a pipe plug). Constructed of heavy duty specially treated industrial fabric. 100-101 Series Economy Drain Jet, Pressure range: 30-95 psig 102 Series Professional Drain Jet, Pressure range: 30-100 psig 103 Series Drain Jet Pro, Pressure range: use with Jetter pressures but never exceed pipeline capacity |
Related Product Links Other Drain Cleaning Tools Plug Inflation Accessories Operating Instructions Product Use Guide |  |
Clear Sand & Debris - Insert Flusher above debris with outlet pointed up stream
- Turn on water full force allowing water head build up
- Turn off water and remove Flusher; the released head of water clears pipeline
| |
Clear Obstructed Sewer - Insert Flusher above debris with outlet pointed down stream
- Turn on water full force allowing water to expand Flusher
- Water flow and pressure builds between Flusher and blockage clearing sewer
| |
Click an Item Number below to order
| Pipe Diameter | Maximum*
Flushing
Pressure | Inlet
Coupling | Outlet
Connection in npt | Deflated Length | Shpg
Wt
lbs | Item
Number** | Unit
Price Each |
| Maximum | Minimum |
| in | mm | in | mm | in | mm |
| 4 | 102 | 3 | 76 | 100 psig | 1 1/2" npsm | 1 M | 18 | 457 | 4 | 107-004-1 | |
| 4 | 102 | 3.5 | 89 | 100 psig | 2 1/2" nh | 1 1/2 M | 18 | 457 | 7 | 107-004-3 | |
| 6 | 152 | 4.0 | 102 | 100 psig | 1 1/2" npsm | 1 M | 23 | 584 | 5 | 107-006-1 | |
| 6 | 152 | 5.0 | 127 | 100 psig | 2 1/2" nh | 1 1/2 M | 23 | 584 | 8 | 107-006-3 | |
| 8 | 203 | 4.0 | 102 | 100 psig | 1 1/2" npsm | 1 M | 28 | 711 | 6 | 107-008-1 | |
| 8 | 203 | 5.0 | 127 | 100 psig | 2 1/2" nh | 1 1/2 M | 28 | 711 | 9 | 107-008-3 | |
| 10 | 254 | 4.0 | 102 | 100 psig | 2" npsm | 1 1/4 M | 33 | 838 | 8 | 107-010-2 | |
| 10 | 254 | 5.0 | 127 | 100 psig | 2 1/2" nh | 1 1/2 M | 33 | 838 | 13 | 107-010-3 | |
| 12 | 305 | 4.0 | 102 | 100 psig | 2" npsm | 1 1/4 M | 46 | 1168 | 13 | 107-012-2 | |
| 12 | 305 | 5.0 | 127 | 100 psig | 2 1/2" nh | 2 M | 46 | 1168 | 14 | 107-012-3 | |
Custom configurations also available
*Warning: When used as an inflatable plug, inflate only to 25% of the flushing pressure! Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 ½ to 2 times the diameter, but even a head pressure of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage could cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure could cause injury or catastrophic damage.
Products covered by one or more of the following patents: 4,565,222; 5,353,842; 5,901,752; 6,446,669; 6,568,429; 6,899,138 and other applications pending.