| Nominal Size | Range of Use | Maximum Back Pressure | Length | Shpg Wt lbs | Item Number | Unit Price Each | 1" - 1.25"
(25-30 mm) | 1"-1.38"
(23-35 mm) | 6.5 psi
(0.,45 bar) | 15 ft.
(4.5 M) | 2.5"
(64 mm) | 1 | 142-8012 | | 2"
(50 mm) | 1.9"-2.31"
(49-59 mm) | 6.5 psi
(0.,45 bar) | 15 ft.
(4.5 M) | 2.5"
(64 mm) | 1 | 142-802 | | 3"
(75 mm) | 2.8"-3.1"
(71-79 mm) | 6.5 psi
(0.,45 bar) | 15 ft.
(4.5 M) | 2.6"
(66 mm) | 1 | 142-803 | | 4"
(100 mm) | 3.8"-4.38"
(97-111 mm) | 6.5 psi
(0.,45 bar) | 15 ft.
(4.5 M) | 3.0"
(76 mm) | 1 | 142-804 | | 6"
(150 mm) | 5.77"-6.08"
(147-155 mm) | 6.5 psi
(0.,45 bar) | 15 ft.
(4.5 M) | 3.98"
(101 mm) | 2 | 142-806 | | 8"
(200 mm) | 7.76"-8.03"
(97-204 mm) | 6.5 psi
(0.,45 bar) | 15 ft.
(4.5 M) | 3.98"
(101 mm) | 3 | 142-808 | | | Pad Lock, Size #2 | 1 | 142-800 | | | Shackle Dims: 0.215" diameter, 0.73" horizontal clearance, 0.67" vertical clearance | | Body Dims: 1.073" height, 1.39" width, 0.419" thickness | Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage could cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use a mechanical plug when its failure could cause injury. Specifications subject to change without notice |