143-5 Series Water Line Stub Plugs Sizes: .39" to 5"

For other mechanical plugs click here

143-5-Series Mechanical Hand Tightening Test Plugs Operation & Maintenance Instructions

Mechanical Pipe Plugs Without Integral Restraint Generic Operating Instructions

These plugs have a SBR/Natural rubber o-ring.

Works in all types of pipe.

Ideal for plugging water line stub-outs.

Designed for high pressure applications.

Sizes .39" to 1.25" have a wing nut.

Sizes 1.5" to 5" have a hex nut.

water line stub plugs

Click an Item Number below to order

Pipe Diameter Maximum Allowable Back Pressures* Product Shpg
Wt
lbs
Item
Number
Unit
Price
Each
Nominal Maximum Minimum Air Pressure Head Pressure Dia Length
in mm in mm in mm psi bar ft m in mm in mm
.39 10 .43 11 .38 10 185 12.8 428 128 .38 10 1.87 48 1 143-5004
.5 13 .56 14 .5 13 180 12.4 415 124 .49 12 1.87 48 1 143-5005
.75 20 .87 22 .72 18 180 12.4 415 124 .7 18 2.06 52 1 143-5007
1 25 1.02 26 .86 22 40 2.8 92 28 .84 21 2.18 55 1 143-5010
1.25 32 1.43 36 1.24 32 112 7.7 258 77 1.22 31 2.06 52 1 143-5012
1.5 40 1.53 39 1.43 36 88 6.1 203 62 1.41 36 1.87 48 1 143-5015
2 50 2.06 52 1.73 44 112 7.7 258 77 1.71 43 2.63 67 1 143-5020
2.5 60 2.78 71 2.3 58 72 4.9 166 51 2.28 58 2.75 70 1 143-5025
3 75 3.2 81 2.73 69 28 1.9 65 19 2.71 69 3.12 79 2 143-5030
4 100 4.5 114 3.72 95 24 1.7 55 17 3.7 94 3.12 79 3 143-5040
5 125 5.19 132 4.8 122 8 .6 18 6 4.78 121 3.25 82 3 143-5050

Material: Natural rubber o-ring.

*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage could cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use a mechanical plug when its failure could cause injury.