Login
   |  

Buy On-Line or Call 1-800-926-1926 or 262-692-2416

151 Series High Lift Flange Weld Test Plugs Sizes: 3/4" to 24"

For testing pressures up to 1125 psi

Prices and Specifications for 3/4" to 8"

Prices and Specifications for 10" to 16"

Prices and Specifications for 18" to 24"

For other mechanical plugs click here

For Portable Hydrostatic Test Pumps click here

151-Series High Lift Flange Test & Welding Plugs Operating Instructions for Sizes 3/4" to 8"

151-Series High Lift Flange Test & Welding Plugs Operating Instructions for Sizes 10" to 24"


 high lift weld flange

These plugs have a Urethane seal.

  • Fast, easy installation, and testing.
  • Segmented compression tube allows adjustment of seal installation depth.
  • Faster pipe repairs and retrofits.
  • Improved Seal-to-Pipe Clearance: Plug can be easily installed and removed, even where there is severe weld protrusion.
  • Low water requirements resulting in less waste water.
  • A minimum of 1.5:1 safety factor.
  • Rugged, heavy-duty construction.
  • Versatile: Seal and washer sets easily change to accommodate different pipe schedules.
  • Ported Center Shaft: Permits monitoring of downstream pressure of inert gas rejection.
  • Flange classes 150 - 600 lbs.
  • Seal Materials: Urethane Standard.
Maximum Test Pressures

ANSI

Maximum psig
Flange Class
psi
bar
150
450
30.9
300
1125
77.2
600 & up
1125*
77.2*
*Consult Factory
Pipe Size
Crowfoot Wrench or Socket Size
3/4" to 1"
9/16" Crowfoot Wrench
1 1/4" to 2"
15/16" Crowfoot Wrench
2 1/2" to 4"
2" Deep Impact Socket
6" to 8"
3 1/8" Deep Impact Socket
10" to 24"
1 5/8" Deep Impact Socket

weld flange plugs

Click an Item Number below to order

Flange

Pipe

Sched

Seal

to Pipe Clearance

Vent & Fill

Port Size

L1-A Welding

Plug

Application

L1-B Test

Plug

Application

L2 Max L3 L4 Shpg
Wt
lbs		 Item
Number

Unit

Price
Each

Size

in

Class

lb

 in mm in npt in mm in mm in mm in mm in mm
3/4 DN20
 150 160 .05 1.3 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P160
150 80 .07 1.8   1/8 F


12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P80
150 40 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P40
150 10 .07 1.8 1/8F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P10
300 160 .05 1.3 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P160
300 80 .07 1.8   1/8 F


12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P80
300 40 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P40
300 10 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P10
600 160 .05 1.3 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P160
600 80 .07 1.8   1/8 F


12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P80
600 40 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P40
  600 10 .07 1.8 1/8 F 12 3048 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P10
1 DN25 150 XXS .04 1.0 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-PXXS
150 160 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P160
150 80 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P80
150 40 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P40
150 10 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P10
300 XXS .04 1.0 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-PXXS
300 160 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P160
300 80 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P80
300 40 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P40
300 10 .11 2.8 1/8 F 12 304.8

3

 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P10
600 XXS .04 1.0 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-PXXS
600 160 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P160
600 80 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P80
600 40 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P40
  600 10 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P10
1 1/4 DN32
 150 160 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P160
150 80 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P80
150 40 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P40
150 10 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P10
300 160 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P160
300 80 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P80
300 40 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P40
300 10 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P10
600 160 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P160
600 80 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P80
600 40 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P40
  600 10 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P10
1 1/2 DN40 150 160 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P160
150 80 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P80
150 40 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P40
150 10 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P10
300 160 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P160
300 80 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P80
300 40 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P40
300 10 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P10
600 160 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P160
600 80 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P80
600 40 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P40
  600 10 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P10
2 DN50

150

 xxs .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-PXXS
150 160 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P160
150 80 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P80
150 40 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P40
150 10 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P10
300 xxs .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-PXXS
300 160 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P160
300 80 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P80
300 40 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P40
300 10 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P10
600 xxs .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-PXXS
600 160 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P160
600 80 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P80
600 40 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P40
  600 10 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P10
2 1/2 DN65 150 160 .13 3.3 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P160
150 80 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P80
150 40 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P40
150 10 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P10
300 160 .13 3.3 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P160
300 80 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P80
300 40 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P40
300 10 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P10
600 160 .13 3.3 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P160
600 80 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P80
600 40 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P40
  600 10 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P10
3 DN80 150 xxs .23 5.8 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-PXXS
150 160 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P160
150 80 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P80
150 40 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P40
150 10 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P10
300 xxs .23 5.8 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-PXXS
300 160 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P160
300 80 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P80
300 40 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P40
300 10 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P10
600 xxs .23 5.8 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-PXXS
600 160 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P160
600 80 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P80
600 40 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P40
  600 10 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P10
4 DN100 150 xxs .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-PXXS
150 160 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P160
150 120 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P120
150 80 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P80
150 40 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P40
150 10 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P10
300 xxs .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-PXXS
300 160 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P160
300 120 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P120
300 80 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P80
300 40 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P40
300 10 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P10
600 xxs .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-PXXS
600 160 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P160
600 120 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P120
600 80 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P80
600 40 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P40
  600 10 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P10
6 DN150 150 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P160
150 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P120
150 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P80
150 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P40
150 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P10
300 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P160
300 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P120
300 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P80
300 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P40
300 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P10
600 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P160
600 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P120
600 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P80
600 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P40
  600 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P10
8 DN200 150 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P160
150 xxs .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-PXXS
150 140 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P140
150 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P120
150 100 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P100
150 60 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P60
150 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P80
150 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P40
150 20 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P20
150 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P10
300 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P160
300 xxs .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-PXXS
300 140 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P140
300 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P120
300 100 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P100
300 60 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P60
300 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P80
300 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P40
300 20 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P20
300 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P10
600 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P160
600 xxs .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-PXXS
600 140 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P140
600 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P120
600 100 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P100
600 60 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P60
600 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P80
600 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P40
600 20 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P20
  600 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P10
weld flange plug
Flange

Pipe

Sched

Bottom

Washer

OD*

Plug

OD*

Vent & Fill Port

in NPT

Shaft

Qty

Dim to Seal

Overall Length

Seal/

Washer

Length

 Seal O-Ring

Dash

No.**

 Shpg
Wt
lbs		 Item
Number

Unit

Price
Each

Size

in

Class

lb
in
mm
in
mm
in
mm
in
mm
in
mm
10 DN250 150 100 (4) 8.81 223.8 8.81 223.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 3 1/2 88.9 -445 175
150
80
8.81
223.8
9.06
230.1
3/4 F
4
12 1/2
317.5
20 11/16
525.5
4
101.6
-446
175
150 60/xs 8.81 223.8 9.25 235.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -446 175
150
40/std
8.81
223.8
9.52
241.8
3/4 F
4
12 1/2
317.5
20 11/16
525.5
4
101.6
-447
175
150 30 8.81 223.8 9.64 244.9 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -447 175
150 20 8.81 223.8 9.75 247.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -447 175
150 10 8.81 223.8 9.92 252.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 175
150 5 8.81 223.8 9.98 253.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 175

300

 100 (4) 8.81 223.8 8.81 223.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 3 1/2 88.9 -445 230
300 80
8.81
223.8
9.06
230.1
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-446
230
300 60/xs 8.81 223.8 9.25 235.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -446 230
300 40/std
8.81
223.8
9.52
241.8
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-447
230
300 30 8.81 223.8 9.64 244.9 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -447 230
300 20 8.81 223.8 9.75 247.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -447 230
300 10 8.81 223.8 9.92 252.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 230
300 5 8.81 223.8 9.98 253.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 230
600 100 (4) 8.81 223.8 8.81 223.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 3 1/2 88.9 -445 339
600 80
8.81
223.8
9.06
230.1
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-446
339
600 60/xs 8.81 223.8 9.25 235.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -446 339
600 40/std
8.81
223.8
9.52
241.8
3/4 F
4
12 1/2
317.5
20 11/16
525.5
4
101.6
-447
339
600 30 8.81 223.8 9.64 244.9 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -447 339
600 20 8.81 223.8 9.75 247.7
3/4 F
4 12 1/2 317.5 20 11/16 525.5 4 101.6 -447 339
600 10 8.81 223.8 9.92 252.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 339
  600 5 8.81 223.8 9.98 253.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 339
12 DN300
150
80 (4)
10.87
276.1
10.87
276.1
 3/4 F
4
12 1/2
317.5
20 11/16
525.5
3 1/2
88.9
-449
212
150 60 10.87 276.1 11.13 282.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 212
150 xs 10.87 276.1 11.25 285.8 3/4 F 4
12 1/2
317.5
20 11/16
525.5 4 101.6 -450 212
150
40/std
10.87
276.1
11.50
292.1
 3/4 F
4
 12 1/2 317.5 20 11/16
525.5
4
101.6
-451
212
150 30 10.87 276.1 11.59 294.4 3/4 F 4
12 1/2
317.5
20 11/16
525.5 4 101.6 -451 212
150 20 10.87 276.1 11.75 298.5 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -451 212
150 10/5 10.87 276.1 11.94 303.3 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -452 212
300
80 (4)
10.87
276.1
10.87
276.1
 3/4 F 4 12 1/2 317.5 20 11/16
525.5
3 1/2
88.9
-449
332
300 60 10.87 276.1 11.13 282.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 332
300 xs 10.87 276.1 11.25 285.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 332
300
40/std
10.87
276.1
11.50
292.1
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-451
332
300 30 10.87 276.1 11.59 294.4 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -451 332
300 20 10.87 276.1 11.75 298.5 3/4 F 4
12 1/2
317.5
20 11/16
525.5 4 101.6 -451 332
300 10/5 10.87 276.1 11.94 303.3
3/4 F
4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -452 332
600
80 (4)
10.87
276.1
10.87
276.1
 3/4 F 4 12 1/2 317.5 20 11/16
525.5
3 1/2
88.9
-449
444
600 60 10.87 276.1 11.13 282.7
3/4 F
4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 444
600 xs 10.87 276.1 11.25 285.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 444
600
40/std
10.87
276.1
11.50
292.1
 3/4 F 4 12 1/2 317.5 20 11/16
525.5
4
101.6
-451
444
600 30 10.87 276.1 11.59 294.4 3/4 F 4
12 1/2
317.5 20 11/16 525.5 4 101.6 -451 444
600 20 10.87 276.1 11.75 298.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -451 444
  600 10/5 10.87 276.1 11.94 303.3 3/4 F 4
12 1/2
317.5 20 11/16 525.5 4 101.6 -452 444
14 DN350 150 140 (4) 11.00 279.4 11.00 279.4 3/4 F 6

12 1/2

 317.5 20 15/16 531.8 3 3/4 95.3 N/A 296
150 120 11.00 279.4 11.31 287.3 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1

N/A

 296
150 100 11.00 279.4 11.62 295.1 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296
150
80
11.00
279.4
12.00
304.8
 3/4 F
6
 12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
296
150 60 11.00 279.4 12.31 312.7 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296
150 xs 11.00 279.4 12.50 317.5 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296
150
40
11.00
279.4
12.62
320.5
 3/4 F
6
12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
296
150 30/std 11.00 279.4 12.75 323.9 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296
150 20 11.00 279.4 12.88 327.2 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296
150 10/10s/5 11.00 279.4 13.12 333.2 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 296
300 140 (4) 11.00 279.4 11.00 279.4
3/4 F
6 12 1/2 317.5 20 15/16 531.8 3 3/4 95.3 N/A 386
300 120 11.00 279.4 11.31 287.3 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1

N/A

 386
300 100 11.00 279.4 11.62 295.1
3/4 F
6

12 1/2

 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386
300
80
11.00
279.4
12.00
304.8
 3/4 F 6 12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
386
300 60 11.00 279.4 12.31 312.7 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386
300 xs 11.00 279.4 12.50 317.5 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386
300
40
11.00
279.4
12.62
320.5
 3/4 F 6 12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
386
300 30/std 11.00 279.4 12.75 323.9 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 386
300 20 11.00 279.4 12.88 327.2 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386
  300 10/10s/5 11.00 279.4 13.12 333.2 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 386
16 DN400 150 120 (4) 13.06 331.7 13.06 331.7
3/4 F
8 12 1/2 317.5 20 15/16 531.8 3 3/4 95.3 N/A 397
150 100 13.06 331.7 13.44 341.4 3/4 F 8
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 397
150
80
13.06
331.7
13.81
350.8
 3/4 F
8

12 1/2

 317.5 20 15/16
531.8
4 3/8
111.1
N/A
397
150 60 13.06 331.7 14.19 360.4 3/4 F 8 12 1/2
317.5
20 15/16
531.8 4 3/8 111.1 N/A 397
150
40/xs
13.06
331.7
14.5
368.3
 3/4 F
8
 12 1/2 317.5 20 15/16
531.8
4 3/8
111.1
N/A
397
150 30/std 13.06 331.7 14.75 374.7 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 397
150 20 13.06 331.7 14.88 378.0 3/4 F 8 12 1/2
317.5
20 15/16
531.8 4 3/8 111.1 N/A 397
150 10 13.06 331.7 15.12 384.0 3/4 F 8
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 397
300 120 (4) 13.06 331.7 13.06 331.7 3/4 F 8 12 1/2 317.5 20 15/16 531.8 3 3/4 95.3 N/A 528
300 100 13.06 331.7 13.44 341.4 3/4 F 8
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 528
300
80
13.06
331.7
13.81
350.8
 3/4 F
8

12 1/2

 317.5 20 15/16
531.8
4 3/8
111.1
N/A
528
300 60 13.06 331.7 14.19 360.4 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 528
300
40/xs
13.06
331.7
14.5
368.3
 3/4 F
8
 12 1/2 317.5 20 15/16
531.8
4 3/8
111.1
N/A
528
300 30/std 13.06 331.7 14.75 374.7 3/4 F 8 12 1/2
317.5
20 15/16
531.8 4 3/8 111.1 N/A 528
300 20 13.06 331.7 14.88 378.0 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 528
  300 10 13.06 331.7 15.12 384.0 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 528
weld flange plug
Flange

Pipe

Sched

Bottom

Washer

OD*

Plug

OD*

Vent & Fill Port

in NPT

Shaft

Qty

Dim to Seal

Overall Length

Seal/ Washer

Length

 Seal

O-Ring

Dash

No.**

 Shpg
Wt
lbs		 Item
Number

Unit

Price
Each

Size

in

Class

lb
in
mm
in
mm
in
mm
in
mm
in
mm
18 DN450 150 120 (4)

14.75

 374.7 14.75 374.7 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 101.6 N/A 497
150 100 14.75 374.7 15.19 385.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
150
80
14.75
374.7
15.62
396.7
 3/4 F
8
 12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
497
150 60 14.75 374.7 16.00 406.4 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
150
40
14.75
374.7
16.38
416.1
 3/4 F
8
 12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
497
150 xs 14.75 374.7 16.50 419.1 3/4 F 8
12 1/2
317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
150 30 14.75 374.7 16.62 422.1 3/4 F 8

12 1/2

 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
150 std 14.75 374.7 16.75 425.5 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
150 20 14.75 374.7 16.88 428.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
150 10/10s/5 14.75 374.7 17.12 434.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497
300 120 (4)

14.75

 374.7 14.75 374.7
3/4 F
8 12 1/2 317.5 20 11/16 525.5 4 101.6 N/A 656
300 100 14.75 374.7 15.19 385.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
300
80
14.75
374.7
15.62
396.7
3/4 F
8
12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
656
300 60 14.75 374.7 16.00 406.4 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
300
40
14.75
374.7
16.38
416.1
 3/4 F
8
 12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
656
300 xs 14.75 374.7 16.50 419.1 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
300 30 14.75 374.7 16.62 422.1 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
300 std 14.75 374.7 16.75 425.5 3/4 F 8
12 1/2
317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
300 20 14.75 374.7 16.88 428.8 3/4 F 8

12 1/2

 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
  300 10/10s/5 14.75 374.7 17.12 434.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656
20 DN500 150 100 (4) 16.94 430.3 16.94 430.3
3/4 F
10 12 1/2 317.5 20 11/16 525.5 3 3/4 95.3 N/A 640
150
80
16.94
430.3
17.44
443.0
 3/4 F
10
 12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
640
150 60 16.94 430.3 17.88 454.2 3/4 F 10
12 1/2
317.5 20 11/16 525.5 4 3/8 111.1 N/A 640
150
40
16.94
430.3
18.31
465.1
 3/4 F
10
12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
640
150 30/xs 16.94 430.3 18.50 469.9 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 640
150 20/std 16.94 430.3 18.75 476.3 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 640
150 10/10s/5 16.94 430.3 19.06 484.1 3/4 F 10
12 1/2
317.5 20 11/16 525.5 4 3/8 111.1 N/A 640
300 100 (4) 16.94 430.3 16.94 430.3 3/4 F 10 12 1/2 317.5 20 11/16 525.5 3 3/4 95.3 N/A 870
300
80
16.94
430.3
17.44
443.0
 3/4 F
10
12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
870
300 60 16.94 430.3 17.88 454.2 3/4 F 10

12 1/2

 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870
300
40
16.94
430.3
18.31
465.1
 3/4 F
10
 12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
870
300 30/xs 16.94 430.3 18.50 469.9 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870
300 20/std 16.94 430.3 18.75 476.3 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870
  300 10/10s/5 16.94 430.3 19.06 484.1 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870
24 DN600 150 120 (4) 19.88 505.0 19.88 505.0 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 101.6 N/A 932
150 100 19.88 505.0 20.44 519.2 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932
150
80
19.88
505.0
21.06
534.9
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
932
150 60 19.88 505.0 21.56 547.6 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932
150
40
19.88
505.0
22.12
561.8
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
932
150 30 19.88 505.0 22.38 568.5 3/4 F 12

12 3/4

 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932
150 xs 19.88 505.0 22.50 571.5 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932
150 20/std 19.88 505.0 22.75 577.9 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932
150 10/5 19.88 505.0 23.06 585.7 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932
300 120 (4) 19.88 505.0 19.88 505.0 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 101.6 N/A 1255
300 100 19.88 505.0 20.44 519.2 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255
300
80
19.88
505.0
21.06
534.9
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
1255
300 60 19.88 505.0 21.56 547.6 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255
300
40
19.88
505.0
22.12
561.8
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
1255
300 30 19.88 505.0 22.38 568.5 3/4 F 12

12 3/4

 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255
300 xs 19.88 505.0 22.50 571.5 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255
300 20/std 19.88 505.0 22.75 577.9 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255
  300 10/5 19.88 505.0 23.06 585.7 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255

* Seal-to-pipe clearance: approximately 1/2". Clearance may be slightly smaller on plugs that accommodate more than one schedule size.  Replacement washers:  required on all schedule sizes except for the smallest ID for each size pipe.

** External O-ring:  included on 10" and 12" seals.

Other flange class ratings and pipe schedules available upon request.  Call for pricing.

Ordering information needed:  flange size and rating, pipe ID or schedule, and test pressure.

Maximum Test Pressures

ANSI

Maximum psig
Flange Class
psi
bar
150
450
30.9
300
1125
77.2
600 & up
1125*
77.2*
*Consult Factory
Pipe Size
Crowfoot Wrench or Socket Size
3/4" to 1"
9/16" Crowfoot Wrench
1 1/4" to 2"
15/16" Crowfoot Wrench
2 1/2" to 4"
2" Deep Impact Socket
6" to 8"
3 1/8" Deep Impact Socket
10" to 24"
1 5/8" Deep Impact Socket

*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage could cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use a mechanical plug when its failure could cause injury.

Specifications subject to change without notice

tracert