Login
   |  

Buy On-Line or Call 1-800-926-1926 or 262-692-2416

134 Series Municipal Style Kevlar® Reinforced Rubber Test Plugs Without By-Pass Sizes: 1.60" to 72"

For other inflatable plugs click here

For protective sleeves click here

Inflation controllers, gauges, hoses, etc. on our accessories page

Petersen Inflatable Pipe Plugs Generic Operating Instruction Manual

These plugs are molded of *NR-SBR rubber reinforced with Kevlar tire cording.

* NR = Isoprene rubber. SBR = Styrene-butadiene rubber.

Multi-size pneumatic molded rubber plugs for testing residential and commercial plumbing systems

Due to their light weight and short length, these plugs are easy to handle even in large diameter sizes.

All plugs are equipped with a 1/4" male quick-connect inflation port. Reinforcement sleeves available for heavy duty use.

 

 

 

 

 

 

 

Item Number 134-048

 

Click an Item Number below to order

Pipe Diameter Plug
Diameter		 Required

**Pipeline

 Valve
Type 		Eye Bolt
Size		 Deflated Shpg
Wt
lbs		 Item
Number		 Unit
Price
Each
Inflation Max. Head
Maximum Minimum Length
in mm in mm in mm psig ft m in QC in mm in mm
2.8 72 1.6 41 1.40 36 36.0 34 10.4 1/4 M 0.24 6 7.7 195 1 134-002
6 153 2.80 72 2.70 69 36.0 34 10.4 1/4 M 0.24 6 13.2 335 2 134-006
8 203 3.63 92 3.60 92 36.0 34 10.4 1/4 M 0.24 6 21.1 536 3 134-008
12 305 5.63 143 5.60 143 36.0 34 10.4 1/4 M 0.32 8 22.6 575 5 134-012
16 406 7.50 190 7.60 194 36.0 34 10.4 1/4 M 0.32 8 25.0 635 10 134-016
21 533 10.75 273 10.70 272 36.0 34 10.4 1/4 M 0.32 8 26.6 676 14 134-021
24 610 13.00 330 12.70 323 36.0 34 10.4 1/4 M 0.39 10 34.1 867 19 134-024
30 762 14.00 356 13.50 343 36.0 34 10.4 1/4 M 0.39 10 42.7 1085 25 134-030
40 1016 19.00 483 18.60 473 21.6 16 4.9 1/4 M 0.39 10 46.7 1187 39 134-040
48 1219 23.00 584 22.60 559 21.6 16 4.9 1/4 M 0.39 10 59.0 1499 83 134-048
60 1524 30.00 762 23.60 600 14.5 13 4.0 1/4 M 0.39 10 90.6 2302 148 134-060
72 1828 30.00 762 23.6 600 14.5 13 4.0 1/4 M 0.39 10 116.5 2959 231 134-072

Price subject to change without notice

Petersen Terms & Conditions Apply

**Inflatable Plug Warning: Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 Ω to 2 times the diameter, but even a head pressure of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage could cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure could cause injury.

tracert