Petersen® Hot Tap Pipe Plug Insertion Systems |
Related Product Links |
| |
| Petersen® Inflatable Multi-Flex™ Pipe Plugs may be installed into a pressurized pipeline with the Petersen® Hot Tap Pipe Plug Insertion System. This allows for maintenance of pipelines without emptying the pipeline. There are two similar Petersen® Hot Tap Pipe Plug Insertion Systems. The optional Completion Valve is installed between the hot tap sleeve and valve to allow the valve to be removed after the project is completed. |
| |
| |
Installed downstream of the hot
tap. This allows the plug launching system to also by-pass flow
upstream of the Plug. See below for specific information. |
|
Built for
much higher pressures than the 128 Series Plug but requires a
somewhat larger hot tap and inflates immediately below the hot tap.See
below for specific information. |
|
| Click here to download this video (zip file) |
128 Series Hot Tap Pipe Plug Installation System |
|
129 Series Hot Tap Pipe Plug Installation System |
| Contact Petersen for specific suggestions for all your pipeline plugging requirements. Petersen can provide mechanical and inflatable systems for almost any size, pressure, chemical, and temperature requirements. |