(Your shopping cart is empty)

Ask a Question

Home > Categories > 924-1304 Series Leak Detector Pressure Testing

924-1304 Series Leak Detector Pressure Testing

For test pressure up to 10 psi

Prices and Specifications

For other test equipment click here

For Leak Detector Plugs click here

For other plugs adaptable to testing click here


  • Panel includes gauges to monitor compressor pressure, plug pressure and test pressure, all in a sturdy case
  • Panel also has regulators to control plug and test pressure
  • Panel can be used with either 3/8" or 3/4" fill hose, accomplished by simply turning a valve
  • Panel is designed to work with air compressors fitted with either crow's foot or standard quick disconnect fittings

The Leak Detector Low Pressure Air-Testing System has been successfully used for sewer line leak detection for over 40 years. This method of testing pipelines has proven to be the fastest, most economical, and accurate method of testing pipe. Leak test equipment allows you to perform tests as prescribed by ASTM C 828, C 924, and F 1417.

Leak Detector Line Acceptance Kit

The Line Acceptance Kit is used to perform low pressure air tests (up to 10 psi) on newly installed sewer lines. The Line Acceptance Kit includes the control panel, 50' triple hose, and a storage container. Not included in the leakage test equipment kit is an air compressor and pipe plugs.

Petersen Leak Detector Pressure Testing Petersen Leak Detector Pressure Testing

Leak Detector Pressure Testing Panel

Panel includes gauges to monitor compressor pressure, plug pressure, and test pressure, all in a sturdy steel case with a durable powder-coat enamel finish. Panel also has regulators to control plug and test pressure.

Panel can be used with either 3/8" or 3/4" fill hose, accomplished by simply turning a valve. Panel is designed to work with air compressors fitted with either crow's foot or standard quick disconnect fittings

Hi-Flow™ Leak Locator Pane

Leak Detector Pressure Testing Panel
Click an Item Number below to order

Replacement Parts for Control Panel
Click an Item Number below to order

Interconnect Hose

The interconnect hose is used to attach the front and back air test plugs when conducting a leak location test. This hose includes a cable for attaching to the pipe plugs to take strain off the hose during the leak location process.

Triple Hose

The 3/8" diameter hose assembly is used to connect the Leak Detector Panel to the front plug. Triple hose is color-coded, making connections easy to understand. Hose features locking quick disconnects for convenience and safety. Hose also includes strain relief to protect hose and connections from damage. Hi-Flow™ Triple Hose available with 3/4" blue test pressure hose for quick exhausting.

22' Interconnect Hose

Hose
Click an Item Number below to order

Leak Detector Conversion Kit Features:

  • Converts Municipal Style Muni-Ball® plugs to air test plugs
  • Available for line acceptance and/or leak location tests
Petersen Leak Detector Conversion Kit

Equipped with:

  • Colored discs coded to hose connections
  • Conversion set up instructions
Petersen Leak Detector Conversion Kit

Click an Item Number below to order

See Municipal Style Muni-Ball Plugs (130-2 Series)adaptable to Leak Detector Testing