For most size, pressure, chemical, and temperature requirements
Quickly Block the Flow without depressurizing the pipeline!
Petersen’s PeteStop® 129 Series Line Stop is our patented inflatable line stop systems developed to be a far more economical and effective solutions for isolating pressurized pipelines. The small tap hole requires of any PeteStop® plug, reduces equipment size, setup time, and overall project risk.
Advantages of PeteStop® 129-Series Pipe Plug Systems
- Faster – smaller lighter weight equipment
- Less Expensive – smaller hole and smaller equipment needed, less time to complete
- Safety Enhanced - smaller tap hole and larger surface area means less stress on pipe
- Lower Environmental Risk – smaller tap hole
- Plug Abnormal Pipe Conditions - Heavy Corrosion, Out-of-Round Pipe, Weld Bead, etc.
- Versatility – Most pressure, chemical, temperature requirements
- Limited Space Work Environment
- Minimal pressure to seal on pipe ID
- Multiple combinations – Double Block & Bleed, Centered, Off-Center, Side, Flow Stop, High Pressure
- Reusable – Heavyweight Ballistic Nylon reinforced Polyeurethane (Kevlar, Viton & others available)
- Conform to the pipe better
- Line Stop at pipe bend or near pipe bend
- Less Stress on Pipe with Structural Integrity Issues or Aging Pipe versus Mechanical Stop
- Great Complement to Mechanical Stop where there isn’t a workable seal
- Stop flow in pipes over 50”!!
- Over 100 years of pipeline plugging experience.
- Made in the USA
Product Instruction Manual 129 Series
PeteStop® 129-Series Configurator
Note: It is best to stop the flow during the installation of PeteStop® line stops. If not practical, the below maximum flow rate “rule of thumb” seems to be acceptable:
- 1/2 ft/sec for the 129-0 series standard and high pressure plugs
- 10 ft/sec for the 129-8 series Flow Stop plugs
| Image | Dia. Max | Dia. Deflated | Dia. Hot Tap Hole, Min | Pipe Plug Inflation Max Press. | Press. Pipeline Max | Port, Inflation | Port Location, Infl. | Shipping Wt. | Item Number | Price | Qty | Order or Compare |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
96" (2438mm) | 29" (737mm) | 29" (737mm) | 110 PSI (7.58 BAR) | 55 PSI (3.79 BAR) | 6" X 300 Lb ANSI | Centered on Diameter | 336 Lb (152.41 Kg) | 129-096-HP |
$254,600.00
|
||
|
|
96" (2438mm) | 23" (584mm) | 23" (584mm) | 15 PSI (1.03 BAR) | 7.5 PSI (0.52 BAR) | 17 FT (5.3 M) | 4" X 300 Lb ANSI | Centered on Diameter | 240 Lb (108.86 Kg) | 129-096- |
$72,000.00
|
||
|
84" (2134mm) | 29" (737mm) | 29" (737mm) | 110 PSI (7.58 BAR) | 55 PSI (3.79 BAR) | 6" X 300 Lb ANSI | Centered on Diameter | 294 Lb (133.36 Kg) | 129-084-HP |
$207,000.00
|
||
|
|
84" (2134mm) | 19" (483mm) | 19" (483mm) | 15 PSI (1.03 BAR) | 7.5 PSI (0.52 BAR) | 17 FT (5.3 M) | 4" X 300 Lb ANSI | Centered on Diameter | 210 Lb (95.26 Kg) | 129-084- |
$58,600.00
|
||
|
72" (1829mm) | 23" (584.2mm) | 23" (584.2mm) | 120 PSI (8.27 BAR) | 60 PSI (4.14 BAR) | 6" X 300 Lb ANSI | Centered on Diameter | 252 Lb (114.31 Kg) | 129-072-HP |
$135,200.00
|
||
|
|
72" (1829mm) | 19" (483mm) | 19" (483mm) | 20 PSI (1.38 BAR) | 10 PSI (0.69 BAR) | 23 FT (7 M) | 4" X 300 Lb ANSI | Centered on Diameter | 180 Lb (81.65 Kg) | 129-072- |
$45,000.00
|
||
|
66" (1676mm) | 29" (737mm) | 29" (737mm) | 120 PSI (8.27 BAR) | 60 PSI (4.14 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 231 Lb (104.78 Kg) | 129-066-HP |
$103,800.00
|
||
|
|
66" (1676mm) | 17" (432mm) | 17" (432mm) | 20 PSI (1.38 BAR) | 10 PSI (0.69 BAR) | 23 FT (7 M) | 4" X 300 Lb ANSI | Centered on Diameter | 165 Lb (74.84 Kg) | 129-066- |
$34,700.00
|
||
|
60" (1524mm) | 23" (584mm) | 23" (584mm) | 140 PSI (9.65 BAR) | 70 PSI (4.83 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 207 Lb (93.89 Kg) | 129-060-HP |
$98,600.00
|
||
|
60" (1524mm) | 28.5" (724mm) | 29" (737mm) | 10 PSI (0.69 BAR) | 5 PSI (0.34 BAR) | 12 FT (3.5 M) | Through Centering Anchor | End | TBD | 129-060-D |
$98,300.00
|
||
|
60" (1524mm) | 17" (432mm) | 17" (432mm) | 20 PSI (1.38 BAR) | 10 PSI (0.69 BAR) | 23 FT (7 M) | 4" X 300 Lb ANSI | Centered on Diameter | 148 Lb (67.13 Kg) | 129-060- |
$29,000.00
|
||
|
54" (1372mm) | 23" (584mm) | 23" (584mm) | 150 PSI (10.3 BAR) | 75 PSI (5.17 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 201.5 Lb (91.40 Kg) | 129-054-HP |
$60,900.00
|
||
|
54" (1372mm) | 28.5" (724mm) | 29" (737mm) | 30 PSI (2.07 BAR) | 15 PSI (1.03 BAR) | 35 FT (11 M) | Through Centering Anchor | End | TBD | 129-054-D |
$70,200.00
|
||
|
54" (1372mm) | 15" (381mm) | 15" (381mm) | 30 PSI (2.07 BAR) | 15 PSI (1.03 BAR) | 35 FT (11 M) | 4" X 300 Lb ANSI | Centered on Diameter | 144 Lb (65.32 Kg) | 129-054- |
$23,400.00
|
||
|
48" (1219mm) | 17" (432mm) | 17" (432mm) | 150 PSI (10.3 BAR) | 75 PSI (5.17 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 152.5 Lb (69.20 Kg) | 129-048-HP |
$55,500.00
|
||
|
48" (1219mm) | 22.75" (578mm) | 23" (584mm) | 30 PSI (2.07 BAR) | 15 PSI (1.03 BAR) | 35 FT (11 M) | Through Centering Anchor | End | TBD | 129-048-D |
$64,100.00
|
||
|
48" (1219mm) | 15" (381mm) | 15" (381mm) | 30 PSI (2.07 BAR) | 15 PSI (1.03 BAR) | 35 FT (11 M) | 4" X 300 Lb ANSI | Centered on Diameter | 109 Lb (49.44 Kg) | 129-048- |
$21,300.00
|
||
|
42" (1067mm) | 17" (432mm) | 17" (432mm) | 150 PSI (10.3 BAR) | 75 PSI (5.17 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 120 Lb (54.5 Kg) | 129-042-HP |
$40,500.00
|
||
|
42" (1066.8mm) | 22.75" (578mm) | 23" (584mm) | 40 PSI (2.76 BAR) | 20 PSI (1.38 BAR) | 46 FT (14 M) | Through Centering Anchor | End | TBD | 129-042-D |
$58,000.00
|
||
|
42" (1067mm) | 15" (381mm) | 15" (381mm) | 40 PSI (2.76 BAR) | 20 PSI (1.38 BAR) | 46 FT (14 M) | 4" X 300 Lb ANSI | Centered on Diameter | 103 Lb (46.72 Kg) | 129-042- |
$19,300.00
|
||
|
39.37" (1000mm) | 17" (432mm) | 17" (432mm) | 150 PSI (10.3 BAR) | 75 PSI (5.17 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 120 Lb (54.5 Kg) | 129-040-HP |
$38,600.00
|
||
|
40" (1016mm) | 22.75" (578mm) | 23" (584mm) | 40 PSI (2.76 BAR) | 20 PSI (1.38 BAR) | 46 FT (14 M) | Through Centering Anchor | End | TBD | 129-040-D |
$54,400.00
|
||
|
40" (1016mm) | 15" (381mm) | 15" (381mm) | 40 PSI (2.76 BAR) | 20 PSI (1.38 BAR) | 46 FT (14 M) | 4" X 300 Lb ANSI | Centered on Diameter | 83 Lb (37.65 Kg) | 129-040- |
$18,200.00
|
||
|
35.25" (895mm) | 17" (432mm) | 17" (432mm) | 150 PSI (10.3 BAR) | 75 PSI (5.17 BAR) | 4" X 300 Lb ANSI | Centered on Diameter | 103.5 Lb (46.95 Kg) | 129-036-HP |
$23,800.00
|
||
|
35.25" (895mm) | 18.8" (478mm) | 19" (483mm) | 50 PSI (3.45 BAR) | 25 PSI (1.72 BAR) | 58 FT (18 M) | Through Centering Anchor | End | TBD | 129-036-D |
$51,000.00
|
||
|
36" (914mm) | 11.75" (298mm) | 11.875" (302mm) | 75 PSI (5.17 BAR) | 38 PSI (2.59 BAR) | 87 FT (26 M) | 2" X 300 Lb ANSI | Centered on Diameter | 72 Lb (32.66 Kg) | 129-036- |
$17,000.00
|
||
|
31.75" (806mm) | 17" (432mm) | 17" (432mm) | 150 PSI (10.3 BAR) | 75 PSI (5.17 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 100 Lb (45.4 Kg) | 129-032-HP |
$20,900.00
|
||
|
31.25" (794mm) | 18.8" (478mm) | 19" (483mm) | 60 PSI (4.14 BAR) | 30 PSI (2.07 BAR) | 69 FT (21 M) | Through Centering Anchor | End | TBD | 129-032-D |
$46,400.00
|
||
|
32" (813mm) | 11.75" (298mm) | 11.875" (302mm) | 80 PSI (5.52 BAR) | 40 PSI (2.76 BAR) | 92 FT (28 M) | 2" X 300 Lb ANSI | Centered on Diameter | 62 Lb (28.12 Kg) | 129-032- |
$15,400.00
|
||
|
29.25" (743mm) | 15" (381mm) | 15" (381mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 71.0 Lb (32.21 Kg) | 129-030-HP |
$19,700.00
|
||
|
29.25" (743mm) | 16.8" (427mm) | 17" (432mm) | 60 PSI (4.14 BAR) | 30 PSI (2.07 BAR) | 69 FT (21 M) | Through Centering Anchor | End | 61 Lb (27.67 Kg) | 129-030-D |
$42,300.00
|
||
|
30" (762mm) | 11.75" (298mm) | 11.875" (302mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 61 Lb (27.67 Kg) | 129-030- |
$14,100.00
|
||
|
27.5" (699mm) | 12.5" | 15" (381mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 90 Lb (40.8 Kg) | 129-028-HP |
$18,500.00
|
||
|
27.25" (692.15mm) | 14.8" (376mm) | 17" (432mm) | 60 PSI (4.14 BAR) | 30 PSI (2.07 BAR) | 69 FT (21 M) | Through Centering Anchor | End | 44 Lb (19.96 Kg) | 129-028-D |
$25,200.00
|
||
|
28" (711mm) | 11.75" (298mm) | 11.875" (302mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 60 Lb (27.22 Kg) | 129-028- |
$13,200.00
|
||
|
23.5" (597mm) | 13" (330mm) | 13" (330mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 61.5 Lb (27.90 Kg) | 129-024-HP |
$11,800.00
|
||
|
23.25" (591mm) | 14.8" (376mm) | 15" (381mm) | 60 PSI (4.14 BAR) | 30 PSI (2.07 BAR) | 69 FT (21 M) | Through Centering Anchor | End | 44 Lb (19.96 Kg) | 129-024-D |
$21,300.00
|
||
|
23.25" (591mm) | 11.75" (298mm) | 11.875" (302mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 44 Lb (20 Kg) | 129-024- |
$8,400.00
|
||
|
19.25" (489mm) | 11.75" (298mm) | 11.875" (302mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 35 Lb (15.88 Kg) | 129-020-HP |
$9,000.00
|
||
|
19.25" (489mm) | 14.8" (376mm) | 15" (381mm) | 80 PSI (5.52 BAR) | 40 PSI (2.76 BAR) | 92 FT (28 M) | Through Centering Anchor | End | 135 Lb (15.88 Kg) | 129-020-D |
$18,900.00
|
||
|
19.25" (489mm) | 9.75" (248mm) | 9.875" (251mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 35 Lb (15.88 Kg) | 129-020- |
$6,510.00
|
||
|
17.25" (438mm) | 11.75" (298mm) | 11.813" (300mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 46 Lb (20.87 Kg) | 129-018-HP |
$7,000.00
|
||
|
17.25" (438mm) | 12.7" (323mm) | 13" (330mm) | 80 PSI (5.52 BAR) | 40 PSI (2.76 BAR) | 92 FT (28 M) | Through Centering Anchor | End | 33 Lb (14.97 Kg) | 129-018-D |
$12,900.00
|
||
|
17.25" (438mm) | 9.75" (248mm) | 9.875" (251mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 25 Lb (11.34 Kg) | 129-018- |
$5,040.00
|
||
|
15.25" (387mm) | 11.75" (298mm) | 11.875" (302mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 39 Lb (17.69 Kg) | 129-016-HP |
$5,400.00
|
||
|
15.25" (387mm) | 12.7" (323mm) | 13" (330mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-016-D |
$11,700.00
|
||
|
15.25" (387mm) | 9.75" (248mm) | 9.875" (251mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 28 Lb (12.70 Kg) | 129-016- |
$3,890.00
|
||
|
13.25" (337mm) | 9.75" (248mm) | 9.875" (251mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 36.5 Lb (16.56 Kg) | 129-014-HP |
$4,830.00
|
||
|
13.25" (336.55mm) | 11.75" (298mm) | 11.875" (302mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-014-D |
$10,300.00
|
||
|
13.25" (337mm) | 7.75" (197mm) | 7.875" (200mm) | 100 PSI (6.89 BAR) | 50 PSI (3.45 BAR) | 1" X 150 Lb ANSI | Centered on Diameter | 26 Lb (11.79 Kg) | 129-014- |
$3,470.00
|
||
|
12" (304.8mm) | 9.75" (248mm) | 9.875" (251mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 2" X 300 Lb ANSI | Centered on Diameter | 36 Lb (16.33 Kg) | 129-012-HP |
$3,260.00
|
||
|
12" (305mm) | 9.75" (248mm) | 9.875" (251mm) | 120 PSI (8.27 BAR) | 60 PSI (4.14 BAR) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-012-D |
$7,800.00
|
||
|
12" (305mm) | 7.75" (197mm) | 7.875" (200mm) | 120 PSI (8.27 BAR) | 60 PSI (4.14 BAR) | 1" X 150 Lb ANSI | Centered on Diameter | 12 Lb (5.4 Kg) | 129-012- |
$2,630.00
|
||
|
10" (254mm) | 7.75" (197mm) | 7.875" (200mm) | 240 PSI (16.5 BAR) | 120 PSI (8.27 BAR) | 1.5" Inflation Ram Adapter | Centered on Diameter | 12 Lb (5.44 Kg) | 129-010-HP |
$3,260.00
|
||
|
10" (255mm) | 9.75" (248mm) | 9.875" (251mm) | 120 PSI (8.27 BAR) | 60 PSI (4.14 BAR) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-010-D |
$6,930.00
|
||
|
10" (254mm) | 5.75" (146mm) | 5.875" (149mm) | 120 PSI (8.27 BAR) | 60 PSI (4.14 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 11 Lb (4.99 Kg) | 129-010- |
$2,310.00
|
||
|
8" (203mm) | 5.75" (146mm) | 5.875" (149mm) | 240 PSI (16.5 BAR) | 120 PSI (8.27 BAR) | 1.5" Inflation Ram Adapter | Centered on Diameter | 12.6 Lb (5.72 Kg) | 129-008-HP |
$2,420.00
|
||
|
8" (203mm) | 7.8" (198mm) | 7.875" (200mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | Through Centering Anchor | End | 9 Lb (4.08 Kg) | 129-008-D |
$6,000.00
|
||
|
8" (203mm) | 5.75" (146mm) | 5.875" (149mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 9 Lb (4.08 Kg) | 129-008- |
$1,995.00
|
||
|
6" (152mm) | 3.875" (98mm) | 3.875" (98mm) | 230 PSI (15.9 BAR) | 115 PSI (7.93 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 7 Lb (3.18 Kg) | 129-006-HP |
$2,210.00
|
||
|
6" (152.4mm) | 5.8" (147mm) | 5.875"( 149mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | Through Centering Anchor | END | 10 Lb (4.5 Kg) | 129-006-D |
$5,600.00
|
||
|
6" (152mm) | 3.75" (95mm) | 3.875" (98mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-006- |
$1,890.00
|
||
|
4" (101.6mm) | 3.875" (98mm) | 3.875" (98mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 5.6 Lb (2.54 Kg) | 129-004-HP |
$1,890.00
|
||
|
4" (102mm) | 3.75" (95mm) | 3.875" (98mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-004- |
$1,690.00
|
||
|
3" (76mm) | 2.875" (73mm) | 2.875" (73mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-003-HP |
$1,890.00
|
||
|
3" (76mm) | 2.875" (73mm) | 2.875" (73mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-003- |
$1,680.00
|
||
|
2.5" (63.5mm) | 2.375" (60.33mm) | 2.375" (60.33mm) | 200 PSI (13.8 BAR) | 100 PSI (6.87 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lbs (1.82 Kg) | 129-0025-HP |
$1,790.00
|
||
|
2.5" (64 mm) | 2.375" (60mm) | 2.375" (60mm) | 160 PSI (11.0 BAR) | 80 PSI (5.50 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-0025- |
$1,680.00
|
||
|
2" (51mm) | 1.875" (48mm) | 1.875" (48mm) | 200 PSI (13.8 BAR) | 100 PSI (6.89 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-002-HP |
$1,790.00
|
||
|
2" (51mm) | 1.75" (44mm) | 1.875" (48mm) | 160 PSI (11.0 BAR) | 80 PSI (5.52 BAR) | 1" Inflation Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-002- |
$1,680.00
|
Product Selection
Adapters
Annular Seals, Inflatable and Mechanical 
Bladders
Bulkheads
Bypass Inflatable Plugs
Bypass Pipe Plugs
Chemical Resistant Pipe Plugs
Connectors
Custom Manufacturing Solutions
Double Block and Bleed Inflatable Plugs
Double Block and Bleed Mechanical Plugs
Drain Flushers
DrainJet®
DrainJet® Drain Flushers & Sewer Cleaning Tools 
Duct Balloons
Flow Stop
Gas Plug
Grout Bags
High Pressure Mechanical Plugs
Hoses
Hot Tap Machines & Equipment 
Inflatable Test Plugs
Inflation Accessories & Pipeline Fittings 
Inflation Controllers
Joint Testers
Lifting Bags, Inflatable 
Line Stop, High Pressure
Line Stop, Medium Pressure
Mechanical Plugs
Mechanical Test Plugs
Municipal Pipe Plug
Packers Carriers, Relining Inflatable 
PeteStop Inflatable Line Stop Plugs
PeteStop® Inflatable Line Stop Pipe Plugs to block Pressurized Pipelines 
PeteStop® Line Stop Systems, Components & Tools 
Pillow Plugs
Pipe Plugs - Inflatable All Types 
Pipe Plugs - Mechanical All Types 
Pipe Plugs, Inflatable Rubber Molded 
Pipe Plugs, Mechanical Low Pressure 
Pipe Plugs, Multi-Flex® Chemical Resistant 
Pipeline Test Equipment 
Plumbers Plugs
Pressure Gauges
Pumps
Relief Valves
Rubber Molded Pipe Plugs
Sewer Cleaning Tools
Temperature and Pressure Test Plugs 
Through the Valve Line Stop
Tools for Contractors 