Pipe Plug, Mech, Hp Test, 6" Dia, Sch-160, 1/2" Npt Bypass
| By-Pass Flow Through Cap Type | Not Included |
|---|---|
| By-Pass Size | 1/2 MNPT |
| Country of Origin | USA |
| Depth, Full Installation | 5.85" (148.7mm) |
| Functional ID Range | 5.16"-5.37" (131.1mm-136.4mm) |
| Hex Nut Wrench Size | 3/4" |
| Length, Gripper | 2.49" (63.2mm) |
| Length, Seal to Gripper | 4.42" (112.3mm) |
| Lngth, Overall | 9.43" (239.6mm) |
| Material, Body | NPT Shaft and Far End Support are Steel |
| Material, Hardware | Hex Nuts (1 per Shaft) are Black Oil Finish / Positioning Washers are Aluminum |
| Material, Seal | Urethane |
| Nominal Pipe | 6" (152.4mm) |
| Pipe Schedule | 160 |
| Plug OD | 5.05" (128.3mm) |
| Press., Max Test, PSI | 8,000 psi (552 bar) |
| Sage Subcategory Number | W147 |
| Seal Expansion System | Hex Nut |
| Shaft Quantity | 4 |
| Shaft/Port I.D. | 0.46" (11.8mm) |
| Shipping Wt. | 26 Lb (11.79 Kg) |
| Total Clearance From Min. I.D. | 0.11" (2.8mm) |
Pipe Plug, Mech, Hp Test, 6" Dia, Sch-160, 1/2" Npt Bypass
| By-Pass Flow Through Cap Type | Not Included |
|---|---|
| By-Pass Size | 1/2 MNPT |
| Country of Origin | USA |
| Depth, Full Installation | 5.85" (148.7mm) |
| Functional ID Range | 5.16"-5.37" (131.1mm-136.4mm) |
| Hex Nut Wrench Size | 3/4" |
| Length, Gripper | 2.49" (63.2mm) |
| Length, Seal to Gripper | 4.42" (112.3mm) |
| Lngth, Overall | 9.43" (239.6mm) |
| Material, Body | NPT Shaft and Far End Support are Steel |
| Material, Hardware | Hex Nuts (1 per Shaft) are Black Oil Finish / Positioning Washers are Aluminum |
| Material, Seal | Urethane |
| Nominal Pipe | 6" (152.4mm) |
| Pipe Schedule | 160 |
| Plug OD | 5.05" (128.3mm) |
| Press., Max Test, PSI | 8,000 psi (552 bar) |
| Sage Subcategory Number | W147 |
| Seal Expansion System | Hex Nut |
| Shaft Quantity | 4 |
| Shaft/Port I.D. | 0.46" (11.8mm) |
| Shipping Wt. | 26 Lb (11.79 Kg) |
| Total Clearance From Min. I.D. | 0.11" (2.8mm) |
Write Your Own Review
