Login
   |  

Buy On-Line or Call 1-800-926-1926 or 262-692-2416

143-3 Series Steel Wing Nut Plugs Sizes: 1.5" to 6"

For other mechanical plugs click here

143-3-Series Mechanical Hand Tightening Test Plugs Operation & Maintenance Instructions

Mechanical Pipe Plugs Without Integral Restraint Generic Operating Instructions

 

These plugs have a SBR/Natural rubber o-ring.

These plugs feature galvanized metal plates and bolts with a SBR/Natural rubber o-ring.

Cost effective way for plugging open ended pipes.

Can be used as pipe dust cover.

 

wing nut plug

Click an Item Number below to order

Pipe Diameter Maximum Allowable Back Pressures* Product Length Shpg
Wt
lbs		 Item
Number		 Unit
Price
Each
Nominal Maximum Minimum Air Pressure Head Pressure
in mm in mm in mm psi bar ft m in mm
1.5 40 1.65 42 1.44 37 2 .14 5 1.4 2.56 65 1 143-3015
2 50 2.25 57 1.96 50 2 .14 5 1.4 2.62 67 1 143-3020
3 75 3.25 82 2.86 73 2 .14 5 1.4 2.64 67 1 143-3030
4 100 4.5 114 3.78 96 2 .14 5 1.4 3.25 82 1 143-3040
5 125 5.3 135 4.62 117 1 .07 2 .7 3.55 90 2 143-3050
6 150 6.4 162 5.62 143 1 .07 2 .7 3.19 81 2 143-3060

143-3xxx-C Stainless Steel Wing Nut Plugs

These plugs feature stainless steel bolt and plate with a chemical resistant nitrile rubber.

Cost effective chemical resistant plug.

Can be used as pipe dust cover.
wing nut plug
Pipe Diameter Maximum Allowable Back Pressures* Product Length Shpg
Wt
lbs		 Item
Number		 Unit
Price
Each
Nominal Maximum Minimum Air Pressure Head Pressure
in mm in mm in mm psi bar ft m in mm
1.5 40 1.75 44 1.44 37 2 .14 5 1.4 2.56 65 1 143-3015-C
2 50 2.25 57 1.96 50 2 .14 5 1.4 2.62 67 1 143-3020-C
3 75 3.25 82 2.86 73 2 .14 5 1.4 2.64 67 1 143-3030-C
4 100 4.5 114 3.78 96 2 .14 5 1.4 3.25 82 1 143-3040-C
5 125 5.3 135 4.62 117 1 .07 2 .7 3.55 90 2 143-3050-C
6 150 6.3 160 5.62 143 1 .07 2 .7 3.19 81 2 143-3060-C

*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage could cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use a mechanical plug when its failure could cause injury.

tracert