Pipe Plug, Mech, Hp Test, 16" Dia, Sch-80, 1" Npt Bypass
| By-Pass Flow Through Cap Type | Not Included |
|---|---|
| By-Pass Size | 1" MNPT |
| Country of Origin | USA |
| Depth, Full Installation | 10.43" (264.8mm) |
| Functional ID Range | 14.23"-14.69" (361.4mm-373.1mm) |
| Hex Nut Wrench Size | 1-5/8" |
| Length, Gripper | 4.4" (111.8mm) |
| Lngth, Overall | 14.41" (366mm) |
| Length, Seal to Gripper | 7.53" (191.2mm) |
| Material, Body | NPT Plain Steel & Far End Support with Integral Vents - Ductile Iron |
| Material, Hardware | Hex Nuts (1 Per Shaft) Black Oil Finish/Cast Ductile Iron Positioning/top Washers with Tabs |
| Material, Seal | Urethane |
| Nominal Pipe | 16" (406.4mm) |
| Pipe Schedule | 80 |
| Plug OD | 14.13" (358.9mm) |
| Press., Max Test, PSI | 5,000 psi (344.7 bar) |
| Shaft Quantity | 6 |
| Shaft/Port I.D. | 0.82" (20.8mm) |
| Shipping Wt. | 246 Lb (111.58 Kg) |
| Total Clearance From Min. I.D. | 0.1" (2.5mm) |
| Type | 6 |
| Sage Subcategory Number | W147 |
Pipe Plug, Mech, Hp Test, 16" Dia, Sch-80, 1" Npt Bypass
| By-Pass Flow Through Cap Type | Not Included |
|---|---|
| By-Pass Size | 1" MNPT |
| Country of Origin | USA |
| Depth, Full Installation | 10.43" (264.8mm) |
| Functional ID Range | 14.23"-14.69" (361.4mm-373.1mm) |
| Hex Nut Wrench Size | 1-5/8" |
| Length, Gripper | 4.4" (111.8mm) |
| Lngth, Overall | 14.41" (366mm) |
| Length, Seal to Gripper | 7.53" (191.2mm) |
| Material, Body | NPT Plain Steel & Far End Support with Integral Vents - Ductile Iron |
| Material, Hardware | Hex Nuts (1 Per Shaft) Black Oil Finish/Cast Ductile Iron Positioning/top Washers with Tabs |
| Material, Seal | Urethane |
| Nominal Pipe | 16" (406.4mm) |
| Pipe Schedule | 80 |
| Plug OD | 14.13" (358.9mm) |
| Press., Max Test, PSI | 5,000 psi (344.7 bar) |
| Shaft Quantity | 6 |
| Shaft/Port I.D. | 0.82" (20.8mm) |
| Shipping Wt. | 246 Lb (111.58 Kg) |
| Total Clearance From Min. I.D. | 0.1" (2.5mm) |
| Type | 6 |
| Sage Subcategory Number | W147 |
Write Your Own Review
