T&P, Temperature & Pressure Plugs, 310 Series
- Quickly take a temperature or pressure reading
- Self closing Neoprene or Nordel valves after probe removed
- Cap, 3/8"-24 thread, to protect and additional seal
- 1/8”, ¼”. & ½” NPT pipe connections
- For 1/16” & 1/8” probes
- Brass or Stainless-Steel housing
Neoprene Valve resists waxes, fats, oils, greases, petroleum products, and most refrigerants.
Nordel Valve is an ethylene-propylene based synthetic rubber for hot and cold water, low steam, detergents, phosphate esters, ketone, alcohols, and glycols.
This information is a general guide and product should be tested for applicability under actual conditions.
How to Operate:
These plugs are permanently installed in the line at recommended test points. The cap protects the valve and provides an additional seal. After the cap has been removed, either a test thermometer or a gauge adapter with the proper pressure gauge can be inserted through the two, self-closing valves in the plug. Readings are made, adjustments or test can be accomplished and when the probes are withdrawn, the two valves close. The protective cap is then reinstalled. Tests should be made as quickly as possible since the valve reseal time is dependent upon time of insertion, time, and pressure. Slower valve reseal time can be expected at lower temperature and lower pressures.
Features:
- Available in 1/4" and 1/2" NPT sizes
- Available in long length
- Brass body material for non-corrosive service
- Pressure limits to 1000 psi depending on application
- Neoprene core (red cap) for temperature range of 0-200°F, for use with natural gas and petroleum products
- Nordel core (blue cap) for temperature range of 0-275°F, for use with hot and chilled water systems
- Valve core is self-sealing with pressure cup for superior sealing protection
- Tested by an independent lab indicates no leaks at high or low pressure
Pressure & Temperature Plugs, 310-Series
Image | Pipe Size | Lngth, Body | Material, Body | Dia., Probe | Material, Valve | Shipping Wt. | Item Number | Price | Qty | Action |
---|---|---|---|---|---|---|---|---|---|---|
1/2 M | 3" (76mm) | Brass | 1/8" (3.18 mm) | Nordel | 0.5 Lb (0.23 Kg) | 310-710-XL |
$13.96
|
|
||
1/2 M | 1.5" (38mm) | Brass | 1/8" (3.18 mm) | Nordel | 0.5 Lb (0.23 Kg) | 310-710 - |
$8.46
|
|
||
1/2 M | 3" (76mm) | Brass | 1/8" (3.18 mm) | Neoprene | 0.5 Lb (0.23 Kg) | 310-700-XL |
$13.96
|
|
||
1/2 M | 1.5" (38mm) | Brass | 1/8" (3.18 mm) | Neoprene | 0.5 Lb (0.23 Kg) | 310-700 - |
$8.46
|
|
||
1/4 M | 3" (76.2mm) | Brass | 1/8" (3.175mm) | Nordel | 0.5 Lb (0.23 Kg) | 310-110-XL |
$11.50
|
|
||
1/4 M | 1.5" (38.1mm) | Brass | 1/8" (3.175mm) | Nordel | 0.5 Lb (0.23 Kg) | 310-110 - |
$6.18
|
|
||
1/4 M | 3" (76.2mm) | Brass | 1/8" (3.175mm) | Neoprene | 0.5 Lb (0.23 Kg) | 310-100-XL |
$11.50
|
|
||
1/4 M | 1.5" (38.1mm) | Brass | 1/8" (3.175mm) | Neoprene | 0.5 Lb (0.23 Kg) | 310-100 - |
$6.18
|
|
Plug, T&P, Pressure & Temperature Kit
Image | Description | Comment 1 | Comment 2 | Comment 3 | Shipping Wt. | Item Number | Price | Qty | Action |
---|---|---|---|---|---|---|---|---|---|
Test Kit with Protective Carrying Case | One (1) Thermometer 25°-125° f (-3.88-51.66 c) and one (1) Thermometer 0°-220° f (-17.77-104.44 c) | One (1) 0-100 psi (0-6.89 bar) 0-700 kPa Pressure Gauge | One (1) 1/8" x 3" Probe Pressure Gauge Adapter | 2.5 Lb (1.13 Kg) | 312-1500-XLKIT |
$404.08
|
|
||
Test Kit with Protective Carrying Case | Contains one (1) Thermometer 25°-125° f (-3.88-51.66 c) and one (1) Thermometer 0°-220° f (-17.77-104.44 c) | Contains one (1) 0-100 psi (0-6.89 bar) 0-700 kPa Pressure Gauge | Contains One (1) 1/8" x 3" Probe Pressure Gauge Adapter | 2 Lb (0.91 Kg) | 312-1500-XL |
$339.48
|
|
||
Test Kit with Protective Carrying Case | Contains One (1) Thermometer 25°-125° f (-3.88-51.66 c) and One (1) Thermometer 0°-220° f (-17.77-104.44 c) | Contains One (1) 0-100 psi (0-6.89 bar) 0-700 kPa Pressure Gauge | Contains Two (2) 1/8" x 1-1/2" Probe Pressure Gauge Adapters | 2 Lb (0.91 Kg) | 312-1500- |
$320.00
|
|
Thermometers, T&P 5" Stem Probe
The analog thermometers are constructed of stainless steel, has a 1-3/4" dial and accuracy within 1/2% over the entire scale. Recalibrations is by turning the hex nut on the back of the dial case with stem immersed in a known temperature bath. Digital thermometers have the same specifications as above but can not be recalibrated in the field.
Image | Style | Temperature Rating F | Shipping Wt. | Item Number | Price | Qty | Action |
---|---|---|---|---|---|---|---|
Digital, Cannot Recalibrate | -58° F (-50° C) to 571° F (299° C) | 0.5 Lb (0.23 Kg) | 312-606- |
$28.42
|
|
||
Analog with Recalibration | 25° F (-3.88° C) to 125° F ( 52° C) | 0.5 Lb (0.23 Kg) | 312-601- |
$10.42
|
|
||
Analog with Recalibration | 40° F (4.° C) to 160° F (71.° C) | 0.5 Lb (0.23 Kg) | 312-600- |
$10.42
|
|
T&P Pressure Gauge Probe Adapters
The pressure gauge adapter has a probe constructed of 304 stainless steel. The probe is 1/8" in diameter and extends 2" (1 1/2" exposed probe) on the 312-500 adapter and 3-1/2" (3" exposed probe) on the 312-500-XL adapter. The 1/8" diameter probe operates in either the 1/4" or 1/2" Plug. The 312-500-XL Pressure Gauge Probe Adapter will operate in any of the Plugs. Browse pressure gauge plug accessories below.
Image | Size | Material | Shipping Wt. | Item Number | Price | Qty | Action |
---|---|---|---|---|---|---|---|
1/8" Dia X 1-1/2" Long Probe | Stainless Steel | 0.5 Lb (0.23 Kg) | 312-520- |
$64.60
|
|
||
1/16" Dia. X 1 1/2" Long Probe | Brass Body, SS Probe | 0.5 Lb (0.23 Kg) | 312-510- |
$28.20
|
|
||
1/8" Dia. 3" Long Probe | Brass Body, SS Probe | 0.5 Lb (0.23 Kg) | 312-500-XL |
$32.70
|
|
||
1/8" Dia. 1.5" Long Probe | Brass Body, SS Probe | 0.5 Lb (0.23 Kg) | 312-500- |
$22.50
|
|
Gauge, T&P, Compound Pressure
The 3-1/2" pressure gauge plug has an ASME B accuracy of 3/2/3% (2% in middle of scale). It has an adjustable red altitude pointer with a psi and feet of water scale.
Image | Pressure | Connection Type | Shipping Wt. | Item Number | Price | Qty | Action |
---|---|---|---|---|---|---|---|
0-300 psi (0-20.69 bar), 0-2100 kPa | 1/4" MNPT (Brass) | 1 Lb (0.45 Kg) | 312-800-B300 |
$31.56
|
|
||
0-200 psi (0-13.80 bar), 0-1400 kPa | 1/4" MNPT (Brass) | 1 Lb (0.45 Kg) | 312-800-B200 |
$31.56
|
|
||
0-100 psi (0-6.89 bar), 0-700 kPa | 1/4" MNPT (Brass) | 1 Lb (0.45 Kg) | 312-800-B |
$31.56
|
|