Pipe Plug, Mech, Hp Test, 10" Dia, Sch-30, 1" Npt Bypass
| By-Pass Flow Through Cap Type | Not Included |
|---|---|
| By-Pass Size | 1" MNPT |
| Country of Origin | USA |
| Depth, Full Installation | 8.81" (223.8mm) |
| Functional ID Range | 10.06"-10.52" (255.5mm-267.2mm) |
| Hex Nut Wrench Size | 1-5/8" |
| Length, Gripper | 2.88" (73.2mm) |
| Lngth, Overall | 12.34" (313.4mm) |
| Length, Seal to Gripper | 5.84" (148.4mm) |
| Material, Body | NPT Plain Steel & Far End Support with Integral Vents - Ductile Iron |
| Material, Hardware | Hex Nuts (1 Per Shaft) Black Oil Finish/Cast Ductile Iron Positioning/top Washers with Tabs |
| Material, Seal | Urethane |
| Nominal Pipe | 10" (254mm) |
| Pipe Schedule | 30 |
| Plug OD | 9.96" (253mm) |
| Press., Max Test, PSI | 3,000 psi (207 bar) |
| Shaft Quantity | 4 |
| Shaft/Port I.D. | 0.82" (20.8mm) |
| Shipping Wt. | 120 Lb (54 Kg) |
| Total Clearance From Min. I.D. | 0.1" (2.5mm) |
| Type | 6 |
| Sage Subcategory Number | W147 |
Pipe Plug, Mech, Hp Test, 10" Dia, Sch-30, 1" Npt Bypass
| By-Pass Flow Through Cap Type | Not Included |
|---|---|
| By-Pass Size | 1" MNPT |
| Country of Origin | USA |
| Depth, Full Installation | 8.81" (223.8mm) |
| Functional ID Range | 10.06"-10.52" (255.5mm-267.2mm) |
| Hex Nut Wrench Size | 1-5/8" |
| Length, Gripper | 2.88" (73.2mm) |
| Lngth, Overall | 12.34" (313.4mm) |
| Length, Seal to Gripper | 5.84" (148.4mm) |
| Material, Body | NPT Plain Steel & Far End Support with Integral Vents - Ductile Iron |
| Material, Hardware | Hex Nuts (1 Per Shaft) Black Oil Finish/Cast Ductile Iron Positioning/top Washers with Tabs |
| Material, Seal | Urethane |
| Nominal Pipe | 10" (254mm) |
| Pipe Schedule | 30 |
| Plug OD | 9.96" (253mm) |
| Press., Max Test, PSI | 3,000 psi (207 bar) |
| Shaft Quantity | 4 |
| Shaft/Port I.D. | 0.82" (20.8mm) |
| Shipping Wt. | 120 Lb (54 Kg) |
| Total Clearance From Min. I.D. | 0.1" (2.5mm) |
| Type | 6 |
| Sage Subcategory Number | W147 |
Write Your Own Review
