Pipe Plug, ABS Low Psi, Pipe End, 144-1 Series
These Plugs can be used in a variety of applications including DWV (drain, waste and vent) testing and stack testing.
End of pipe design won't fall into the pipe.
Features:
- Ideal for sewer testing and long-term applications
- Made with high impact ABS material
- End of pipe design seals only at the end of a pipe
Equipped with:
- Easy to install extra large zinc wing nut - won't rust
- Neoprene rubber o-ring
- Galvanized carriage bolt to prevent corrosion
Mechanical Pipe Plugs Without Integral Restraint Generic Operating Instructions
Always block plugs when conducting air tests
Pipe Plug, ABS Low Psi, Pipe End, 144-1 Series
| Pipe Size, Nominal | Dia. Max | Dia. Min | By-Pass | Pipeline Max PSI | Pipeline Pressure Max Head | Style | Shipping Wt. | Item Number | Price | Qty | Action |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4" (102mm) | 4.06" (103mm) | 3.8" (97mm) | None | 5 psi (0.34 bar) | 11 ft (3.35 m) | End of Pipe | 1 Lb (0.45 Kg) | 144-1040-E |
$8.44
|
|
|
| 2" (51mm) | 2.17" (55mm) | 1.9" (48mm) | None | 5 psi (0.34 bar) | 11 ft (3.35 m) | End of Pipe | 1 Lb (0.45 Kg) | 144-1020-E |
$5.11
|
|
|
| 1-1/2" (38mm) | 1.65" (42mm) | 1.48" (38mm) | None | 5 psi (0.34 bar) | 11 ft (3.35 m) | End of Pipe | 1 Lb (0.45 Kg) | 144-1015-E |
$4.46
|
|
