Ask a Question

Home > Mechanical Plugs Low and High Pressure > 149-2 Series Double Mechanical Aluminum Body Test Plugs

Pipe Plugs and Packer for most size, pressure, chemical, and temperature requirements

Hand Tightening Aluminum Body Flexible Double Test Plugs Sizes: 1.5" to 8", 149-2 Series

For other mechanical plugs click here
149-Series Mechanical Hand Tightening Test Plugs Operation & Maintenance Instructions
Mechanical Pipe Plugs Without Integral Restraint Generic Operating Instructions

These plugs come standard with molded pure rubber.

Precision Aluminum and Steel And Molded Pure Rubber For Tight Seal Double test plugs for all low pressure sealing requirements.

Flexible Double Test Plugs

1-1/2" - 8" Diameter, Center to Center Distances to 96". Plug does the work of three plugs in one. Both balls on the 1-1/2" and 2" plugs release with the same handle, the lower ball, however, releases before the upper ball. The 3" - 8" sizes have two handles so each ball can be released separately.

Typical Installations

The ball is molded of pure rubber, molded parallel ridges insure perfect seal. Castings are of non-rust aluminum. Handles are of coated steel. All parts are replaceable. Blowouts and water damage are prevented because the Plug allows the system to be drained prior to its removal. The flexible spring bends to any angle to effectively test from any type fitting.

Click an Item Number below to order

Other Center to Center distances to 96" available.

Other sizes and configurations available on special order.

IMPORTANT NOTES: Material: Natural rubber. Replacement rubber and other rubber compounds also available.