The successes we both have had in designing and building equipment to meet the special requirements of our customers has been very rewarding. I appreciate everything you have done to make this possible. The personal relationship we have developed has been very important and meaningful to me. I have very high regard for your analytical and problem solving ability in achieving an objective and creating solutions to problems.
Select Mechanical or
Pipe Plugs based on the
below pipe ID and along with the pressure to be blocked
(PETERSEN DOES NOT SELL PIPE)
ADS N-12™ pipe is smooth inside and available in 4” - 60”
diameters, in nominal 20-ft. lengths. Pipe can be solid or
perforated/slotted. Configuration is N-12™ (corrugated
outside/smooth inside) in 4” - 60” diameters.
Pipe meets the requirements of AASHTO M-252 (3” - 10”), M-294
(12” and larger), Type S (corrugated outside-smooth
The following tables represent the dimensional specifications
for ASTM D3035, ASTM F714 and ASTM F2160 for OD controlled inner duct.
The content in this website may be used but with no warranty or
liability. This information is believed to be correct but should
always be double checked with alternative sources. Strictly adhere
to and follow all applicable national and local regulations and
Warning: All pipe plugs must be blocked or anchored adequately against a force equal to the head pressure times the cross-sectional area of the pipe. Debris or protrusions in the pipeline can damage a seal or rupture inflatable plugs. NEVER use an inflatable plug when its failure could cause injury or catastrophic damage or as the only means of protection for personnel working downstream. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. Actual conditions vary so user must accept full risk and responsibility for the selection and use of any product. Please review our Warranty, Terms and Conditions. Note 1: Mechanical and Molded Rubber Plugs are generally used for testing because fabricated Multi-Flex style plugs may allow some seepage unless customized for a positive seal. Note 2: We are constantly upgrading our products and while we try to keep the websites up to date it is possible more current specifications may be on a quote or confirming order. Images are typically representative and may not be an exact representation especially of the item size.