INFLATABLE PIPE PLUGS
Petersen Products has the inflatable pipe plug you need for your job. Choose from our Multi-Flex® line for plugging hydrocarbons, acids, esthers, and more. Or use the PeteStop® to perform a line stop without shutting down the pipeline. Or our large variety of molded rubber plugs for testing, plugging, bypassing, etc. Or the packer carriers that allow you to do CIPP repairs using air, hot water or steam. Or heavy duty bore hole pipe plugs which dramatically reduce safety and environmental risks. Or custom inflatable bladders for a variety of applications. Or grout bags for sealing off abandoned pipes, mine shafts, tunnels, etc. Or duct plugs custom built to plug an opening. Or Annular Seals that can be used for many applications. Not sure what you need? Give us a call or send us a quote with your unique situation.
Multi-Flex pipe plugs have a much wider application range than rubber plugs, allowing for more chemical, pressure and temperature requirements.
PeteStop® inflatable line stop pipe plugs allow you to hot tap a pipe to do a repair or valve replacement without shutting down the entire system.
Molded Rubber plugs come in a variety of sizes and materials for most applications.
Multi-Flex® Inflatable Packer Carriers allow for air, hot water or steam cure of CIPP (cured in place piping) repairs.
These heavy duty bore hole pipe plugs dramatically reduce safety and environmental risks.
Have a unique application? Call Petersen to see what we can do for you.
Isolate an entire section of ductwork or just a section with ease. Custom shapes and sizes to meet your job requirements.
Annular Seals or Torus Multi-Flex® plugs are used for a wide variety of applications.
- Pipe Plug, Low Pressure Gas, 154 Series
- Pipe Plug, MultiFlex Oil Resist. with or without bypass 114-115 Series
- Pipe Plug, MultiFlex High Expansion, 113 Series
- Pipe Plug, MultiFlex High Pressure Block & Bleed, 127BB Series
- Pipe Plug, MultiFlex, Inflatable High Pressure, 127 Series
- Pipe Plug, MultiFlex, Oil Res. W or WO bypass, Heavy Duty, 124-125 Series
- Pipe Plug, Rigid Core, Bore Hole Plugs with Bypass 126 Series
- Pipe Plug, Aramid Reinforced 136 Series Bypass
- Pipe Plug, Bypass 130-2 Series
- Pipe Plug, Large Bypass, 130-6 Series, Multi Size
- Pipe Plug, Leak Detector, 130-4 Series
- Pipe Plug, Pillow, Heavy Duty, 130-9 Series
- Pipe Plug, Plumber Test Style Rubber Plugs 137 Series
- Pipe Plug, Remote Placement, 130-7 Series
- Pipe Plug, Rubber Plumber, 130-0 Series
- Pipe Plug, Rubber Stack Test, 130-1 Series
- Pipe Plug, Rubber, Long Test 130-3 Series
- Petestop® Pipe Plug, Inflatable Flow Stop, 129-8 Series
- Petestop® Pipe Plug, Inflatable Line Stop, 128 Series
- Petestop® Pipe Plug, Inflatable Line Stop, 129 Series
- Pipe Plug Flange Weld Test, 151 Series
- Pipe Plug, ABS & SS Threaded 143-8 Series
- Pipe Plug, ABS Low Psi, Pipe End, 144-1 Series
- Pipe Plug, ABS Pipe End, 143-9 Series
- Pipe Plug, Aramid Reinforced 136 Series Bypass
- Pipe Plug, Bypass 130-2 Series
- Pipe Plug, EZ-Swet, Stopper, 148-0 Series
- Pipe Plug, Flush Mounted, 140-4, 5 Series
- Pipe Plug, Hand Tight 2 Seals, 149-2 Series
- Pipe Plug, Hand Tight, Bypass 149-1 Series
- Pipe Plug, High PSI, Block & Bleed 145-1 Series
- Pipe Plug, Large Bypass, 130-6 Series, Multi Size
- Pipe Plug, Leak Detector, 130-4 Series
- Pipe Plug, Low Pressure Bypass, 141-0 Series
- Pipe Plug, Low Pressure Gas, 154 Series
- Pipe Plug, Mech High Pressure Test 145-9 Series
- Pipe Plug, Mechanical Hand Tightening, 144-0 Series
- Pipe Plug, Med PSI Test, Bypass 146-9 Series
- Pipe Plug, MultiFlex Oil Resist. with or without bypass 114-115 Series
- Pipe Plug, MultiFlex High Expansion, 113 Series
- Pipe Plug, MultiFlex High Pressure Block & Bleed, 127BB Series
- Pipe Plug, MultiFlex, Inflatable High Pressure, 127 Series
- Pipe Plug, MultiFlex, Oil Res. W or WO bypass, Heavy Duty, 124-125 Series
- Pipe Plug, Nylon, Hand Tite, 142-0 Series
- Pipe Plug, Pillow, Heavy Duty, 130-9 Series
- Pipe Plug, Pipe Protector, Bell or Spigot, 140-0 Series
- Pipe Plug, Plumber Test Style Rubber Plugs 137 Series
- Pipe Plug, Polypropylene End Of Pipe, 143-4
- Pipe Plug, Remote Placement, 130-7 Series
- Pipe Plug, Remote Placement, 148-3 Series
- Pipe Plug, Rigid Core, Bore Hole Plugs with Bypass 126 Series
- Pipe Plug, Rubber Plumber, 130-0 Series
- Pipe Plug, Rubber Stack Test, 130-1 Series
- Pipe Plug, Rubber, Long Test 130-3 Series
- Pipe Plug, Steel Wing Nut, 143-3 Series
- Pipe Plug, T-Handle Aluminum, 143-7 Series
- Pipe Plug, Tapered Redwood, 140-1 Series
- Pipe Plug, Very High PSI, Bypass, 147-1 Series
- Pipe Plug, Water Line Stub, 143-5
- Pipe Plug, Well Monitoring, 142-8 Series
- Pipe Plug, Wing Nut 2 Seals, 141-2 Series
- Pipe Plug, Wing Nut Hand Tight, 141-1 Series
- Hand Tightening Nylon Test & Cleanout Plugs, Sizes 1.5" to 4", 143-0 Series
- Lever Type Expandable Rubber Plugs, Sizes 0.375" to 4", 143-1 Series
- Pipe Plug, ABS & SS Threaded 143-8 Series
- Pipe Plug, ABS Low Psi, Pipe End, 144-1 Series
- Pipe Plug, ABS Pipe End, 143-9 Series
- Pipe Plug, Flush Mounted, 140-4, 5 Series
- Pipe Plug, Low Pressure Bypass, 141-0 Series
- Pipe Plug, Mechanical Hand Tightening, 144-0 Series
- Pipe Plug, Nylon, Hand Tite, 142-0 Series
- Pipe Plug, Pipe Protector, Bell or Spigot, 140-0 Series
- Pipe Plug, Polypropylene End Of Pipe, 143-4
- Pipe Plug, Steel Wing Nut, 143-3 Series
- Pipe Plug, T-Handle Aluminum, 143-7 Series
- Pipe Plug, Tapered Redwood, 140-1 Series
- Pipe Plug, Water Line Stub, 143-5
- Pipe Plug, Well Monitoring, 142-8 Series
- Pipe Plug, Wing Nut 2 Seals, 141-2 Series
- Pipe Plug, Wing Nut Hand Tight, 141-1 Series
- Rubber Seal Pipe Plug, 143-2 Series
- Test Caps, Sizes 1.5" to 6", 142-9 Series
- Pipe Plug Flange Weld Test, 151 Series
- Pipe Plug, EZ-Swet, Stopper, 148-0 Series
- Pipe Plug, Hand Tight 2 Seals, 149-2 Series
- Pipe Plug, Hand Tight, Bypass 149-1 Series
- Pipe Plug, High PSI, Block & Bleed 145-1 Series
- Pipe Plug, Mech High Pressure Test 145-9 Series
- Pipe Plug, Med PSI Test, Bypass 146-9 Series
- Pipe Plug, Remote Placement, 148-3 Series
- Pipe Plug, Very High PSI, Bypass, 147-1 Series
- Pipeline Joint Testers, Sizes 24 to 120in, 145-8 Series
- Safety Gags for Mechanical Pipe Plug
- Petestop® Pipe Plug, Inflatable Flow Stop, 129-8 Series
- Petestop® Pipe Plug, Inflatable Line Stop, 128 Series
- Petestop® Pipe Plug, Inflatable Line Stop, 129 Series
- Pipe Plug, Aramid Reinforced 136 Series Bypass
- Pipe Plug, Bypass 130-2 Series
- Pipe Plug, Large Bypass, 130-6 Series, Multi Size
- Pipe Plug, Leak Detector, 130-4 Series
- Pipe Plug, MultiFlex Oil Resist. with or without bypass 114-115 Series
- Pipe Plug, MultiFlex High Expansion, 113 Series
- Pipe Plug, MultiFlex High Pressure Block & Bleed, 127BB Series
- Pipe Plug, MultiFlex, Inflatable High Pressure, 127 Series
- Pipe Plug, MultiFlex, Oil Res. W or WO bypass, Heavy Duty, 124-125 Series
- Pipe Plug, Pillow, Heavy Duty, 130-9 Series
- Pipe Plug, Plumber Test Style Rubber Plugs 137 Series
- Pipe Plug, Remote Placement, 130-7 Series
- Pipe Plug, Rigid Core, Bore Hole Plugs with Bypass 126 Series
- Pipe Plug, Rubber Plumber, 130-0 Series
- Pipe Plug, Rubber Stack Test, 130-1 Series
- Pipe Plug, Rubber, Long Test 130-3 Series
- Hand Tightening Nylon Test & Cleanout Plugs, Sizes 1.5" to 4", 143-0 Series
- Lever Type Expandable Rubber Plugs, Sizes 0.375" to 4", 143-1 Series
- Pipe Plug Flange Weld Test, 151 Series
- Pipe Plug, ABS & SS Threaded 143-8 Series
- Pipe Plug, ABS Low Psi, Pipe End, 144-1 Series
- Pipe Plug, ABS Pipe End, 143-9 Series
- Pipe Plug, EZ-Swet, Stopper, 148-0 Series
- Pipe Plug, Flush Mounted, 140-4, 5 Series
- Pipe Plug, Hand Tight 2 Seals, 149-2 Series
- Pipe Plug, Hand Tight, Bypass 149-1 Series
- Pipe Plug, High PSI, Block & Bleed 145-1 Series
- Pipe Plug, Low Pressure Bypass, 141-0 Series
- Pipe Plug, Mech High Pressure Test 145-9 Series
- Pipe Plug, Mechanical Hand Tightening, 144-0 Series
- Pipe Plug, Med PSI Test, Bypass 146-9 Series
- Pipe Plug, Nylon, Hand Tite, 142-0 Series
- Pipe Plug, Pipe Protector, Bell or Spigot, 140-0 Series
- Pipe Plug, Polypropylene End Of Pipe, 143-4
- Pipe Plug, Remote Placement, 148-3 Series
- Pipe Plug, Steel Wing Nut, 143-3 Series
- Pipe Plug, T-Handle Aluminum, 143-7 Series
- Pipe Plug, Tapered Redwood, 140-1 Series
- Pipe Plug, Very High PSI, Bypass, 147-1 Series
- Pipe Plug, Water Line Stub, 143-5
- Pipe Plug, Well Monitoring, 142-8 Series
- Pipe Plug, Wing Nut 2 Seals, 141-2 Series
- Pipe Plug, Wing Nut Hand Tight, 141-1 Series
- Pipeline Joint Testers, Sizes 24 to 120in, 145-8 Series
- Rubber Seal Pipe Plug, 143-2 Series
- Test Caps, Sizes 1.5" to 6", 142-9 Series
- Deflection Gauges For Pipeline Diameter Integrity
- Leak Detector Pressure Testing, 924-1304 Series
- Manhole Vacuum Test Equipment
- Parachutes, Stringers, Ventilators
- Pipeline Joint Testers, 24in to 120in
- Pump, Hydrostatic Test, Diaphragm & Gas Engine
- Pump, Hydrostatic Test, High Pressure, 938-9 Series
- Smoke Testers, 938-95 Series