Quickly Block the flow without depressurizing the pipeline!
Pipe plugs for most size, pressure, chemical, and temperature requirements
Reduce Time and Cost with Petersen® Inflatable Line Stop (ILS) systems. Call Petersen or email to discuss the benefits.
- Safety enhanced and Environmental Risk reduced with smaller hot tap hole to help maintain pipeline integrity.
- Conforms to out of round pipe configurations for better seal than mechanical stops.
- Time and Cost reduced with smaller lighter weight equipment allows and faster deployment.
- High flexibility, small deflated diameter allows installation through much smaller hot tap than much heavier costlier mechanical stops.
- Heavyweight Ballistic Nylon reinforced Polyurethane construction for long term reuse. Materials such as Kevlar and Viton available for most pressure, chemical, and temperature requirements.
- A minimal inflation pressure with water, air or other inert gas will expand the plug thus most of the pressure is applied to pipe ID for sealing.
- Small deflated plug diameter allows flexible insertion through a much smaller hot tap than mechanical Line Stops
Note: It is best to stop the flow during the installation of PeteStop® line stops. If not practical the below rule of thumb maximum flow rate seems to be acceptable.
1/2 ft/sec for the 129-0 series standard and high pressure plugs
10 ft/sec for the 129-8 series Flow Stop plugs
| Image | Dia. Max | Dia. Deflated | Dia. Hot Tap Hole, Min | Pipe Plug Inflation Max Press. | Pipeline Pressure Max Head | Port, Inflation | Port Location, Infl. | Shipping Wt. | Item Number | Price | Qty | Order or Compare |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
96" (2438mm) | 40.875" (1038mm) | 41" (1041mm) | 12 psi (0.82 bar) | 18 ft (5.48 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8096- |
$180,200.00
|
||
|
84" (2134mm) | 40.875" (1038mm) | 41" (1041mm) | 15 psi (1.03 bar) | 23 ft (7 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8084- |
$146,400.00
|
||
|
72" (1829mm) | 34.875" (886mm) | 35" (889mm) | 15 psi (1.03 bar) | 23 ft (7 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8072- |
$112,700.00
|
||
|
66" (1676mm) | 28.875" (733mm) | 29" (737mm) | 20 psi (1.38 bar) | 30 ft (9.14 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8066- |
$86,500.00
|
||
|
60" (1524mm) | 28.875" (733mm) | 29" (737mm) | 20 psi (1.38 bar) | 30 ft (9.14 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8060- |
$72,500.00
|
||
|
54" (1372mm) | 28.875" (733mm) | 29" (737mm) | 25 psi (1.72 bar) | 30 ft (9.14 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8054- |
$58,500.00
|
||
|
48" (1219mm) | 22.875" (581mm) | 23" (584mm) | 30 psi (2.07 bar) | 46 ft (14.02 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8048- |
$48,100.00
|
||
|
42" (1067mm) | 22.875" (581mm) | 23" (584mm) | 40 psi (2.76 bar) | 61 ft (18.59 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8042- |
$42,000.00
|
||
|
36" (914mm) | 18.875" (479mm) | 19" (483mm) | 60 psi (4.14 bar) | 92 ft (28.04 m) | 4" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8036- |
$39,100.00
|
||
|
32" (813mm) | 18.875" (479mm) | 19" (483mm) | 60 psi (4.14 bar) | 92 ft (28.04 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8032- |
$36,300.00
|
||
|
30" (762mm) | 16.875" (429mm) | 17" (432mm) | 90 psi (6.21 bar) | 138 ft (42.06 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8030- |
$35,200.00
|
||
|
28" (711mm) | 16.875" (429mm) | 17" (432mm) | 90 psi (6.21 bar) | 138 ft (42.06 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8028- |
$33,000.00
|
||
|
24" (610mm) | 14.875" (378mm) | 15" (381mm) | 100 psi (6.90 bar) | 153 ft (46.63 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8024- |
$17,800.00
|
||
|
19.25" (489mm) | 14.875" (378mm) | 15" (381mm) | 100 psi (6.90 bar) | 153 ft (46.63 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8020- |
$15,800.00
|
||
|
17.25" (438mm) | 12.875" (327mm) | 13" (330mm) | 100 psi (6.90 bar) | 153 ft (46.63 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8018- |
$10,800.00
|
||
|
15.25" (387mm) | 12.875" (327mm) | 13" (330mm) | 100 psi (6.90 bar) | 153 ft (46.63 m) | 2" X 300 Lb ANSI | Flow anchor | Call for Weight | 129-8016- |
$9,000.00
|
||
|
13.25" (337mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 153 ft (46.63 m) | 2" X 300 Lb | Flow anchor | Call for Weight | 129-8014- |
$8,600.00
|
||
|
12" (305mm) | 9.75" (248mm) | 9.875" (251mm) | 120 psi (8.28 bar) | 184 ft (56.08 m) | 2" X 300 | Flow anchor | Call for Weight | 129-8012- |
$6,500.00
|
||
|
10" (254mm) | 9.75" (248mm) | 9.875" (251mm) | 120 psi (8.28 bar) | 184 ft (56.08 m) | 2" X 300 | Flow Anchor | Call for Weight | 129-8010- |
$5,700.00
|
||
|
8" (203mm) | 7.75" (197mm) | 7.875" (200mm) | 160 psi (11.03 bar) | 246 ft (75 m) | 2" X 300 | Flow anchor | Call for Weight | 129-8008- |
$5,030.00
|
||
|
6" (152mm) | 5.75" (146mm) | 5.875" (149mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.3 m) | 1" X 150 | Flow anchor | Call for Weight | 129-8006- |
$4,670.00
|
Product Selection
Custom Manufacturing Solutions
Drain Flushers & Sewer Cleaning Tools 
High Pressure Mechanical Pipe Plugs 
Hot Tap Machines & Equipment 
Inflatable Annular Seals, Bladders & Duct Plugs 
Inflatable Lifting Air Bags & Pipe Handlers 
Inflatable Packer Carriers 
Inflation Accessories & Pipeline Fittings 
Low Pressure Mechanical Pipe Plugs 
Multi-Flex® Chemical Resistant Inflatable Pipe Plugs 
PeteStop® Inflatable Line Stop Pipe Plugs 
PeteStop® Line Stop Systems, Components & Tools 
Pipe Plugs - Inflatable 
Pipe Plugs - Mechanical 
Pipeline Test Equipment 
Rubber Molded Inflatable Pipe Plugs 
Temperature and Pressure Test Plugs 
Tools for Contractors 
