Pipe Plug, PeteStop® Inflatable Line Stop - 129 Series
Quickly Block the Flow without depressurizing the pipeline!
The Petersen® PeteStop® 129-Series Line Stop is our best selling system. It is a great choice to complement a mechanical stop or use in place of because of its savings in time, money and lighter, more flexible installation. Plus the PeteStop® Inflatable Line Stop is able to handle more difficult pipe conditions where a mechanical stop would be unable to get a workable seal.
Advantages of PeteStop® 129-Series Pipe Plug Systems
- Faster – smaller lighter weight equipment
- Less Expensive – smaller hole and smaller equipment needed, less time to complete
- Safety Enhanced - smaller tap hole and larger surface area means less stress on pipe
- Lower Environmental Risk – smaller tap hole
- Plug Abnormal Pipe Conditions - Heavy Corrosion, Out-of-Round Pipe, Weld Bead, etc.
- Versatility – Most pressure, chemical, temperature requirements
- Limited Space Work Environment
- Minimal pressure to seal on pipe ID
- Multiple combinations – Double Block & Bleed, Centered, Off-Center, Side, Flow Stop, High Pressure
- Reusable – Heavyweight Ballistic Nylon reinforced Polyeurethane (Kevlar, Viton & others available)
- Conform to the pipe better
- Line Stop at pipe bend or near pipe bend
- Less Stress on Pipe with Structural Integrity Issues or Aging Pipe versus Mechanical Stop
- Great Complement to Mechanical Stop where there isn’t a workable seal
- Stop flow in pipes over 50”!!
Product Instruction Manual 129 Series
PeteStop® 129-Series Configurator
Note: It is best to stop the flow during the installation of PeteStop® line stops. If not practical, the below maximum flow rate “rule of thumb” seems to be acceptable:
- 1/2 ft/sec for the 129-0 series standard and high pressure plugs
- 10 ft/sec for the 129-8 series Flow Stop plugs

Image | Dia. Max | Dia. Deflated | Dia. Hot Tap Hole, Min | Pipe Plug Inflation Max Press. | Pipeline Pressure Max Head | Port, Inflation | Port Location, Infl. | Shipping Wt. | Item Number | Price | Qty | Action |
---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
96" (2438mm) | 41" (1041mm) | 41" (1041mm) | 110 psi (7.58 bar) | 55 psi (3.79 bar)/126.9' (38.7 m) | 6" X 300 Lb ANSI | Centered on Diameter | 336 Lb (152.41 Kg) | 129-096-HP |
$254,600.00
|
||
![]() |
96" (2438mm) | 23" (584mm) | 23" (584mm) | 15 psi (1.03 bar) | 7.5 psi (0.52 bar)/17.3' (5.27 m) | 4" X 300 Lb ANSI | Centered on Diameter | 240 Lb (108.86 Kg) | 129-096- |
$72,000.00
|
||
![]() |
84" (2134mm) | 35" (889mm) | 35" (889mm) | 110 psi (7.58 bar) | 55 psi (3.79 bar)/126.9' (38.7 m) | 6" X 300 Lb ANSI | Centered on Diameter | 294 Lb (133.36 Kg) | 129-084-HP |
$207,000.00
|
||
![]() |
84" (2134mm) | 19" (483mm) | 19" (483mm) | 15 psi (1.03 bar) | 7.5 psi (0.52 bar)/17.3' (5.27 m) | 4" X 300 Lb ANSI | Centered on Diameter | 210 Lb (95.26 Kg) | 129-084- |
$58,600.00
|
||
![]() |
72" (1829mm) | 29" (737mm) | 29" (737mm) | 120 psi (8.27 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 6" X 300 Lb ANSI | Centered on Diameter | 252 Lb (114.31 Kg) | 129-072-HP |
$135,200.00
|
||
![]() |
72" (1829mm) | 19" (483mm) | 19" (483mm) | 20 psi (1.38 bar) | 10 psi (0.69 bar)/23.1' (7.03 m) | 4" X 300 Lb ANSI | Centered on Diameter | 180 Lb (81.65 Kg) | 129-072- |
$45,000.00
|
||
![]() |
66" (1676mm) | 29" (737mm) | 29" (737mm) | 120 psi (8.27 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 4" X 300 Lb ANSI | Centered on Diameter | 231 Lb (104.78 Kg) | 129-066-HP |
$103,800.00
|
||
![]() |
66" (1676mm) | 17" (432mm) | 17" (432mm) | 20 psi (1.38 bar) | 10 psi (0.69 bar)/23.1' (7.03 m) | 4" X 300 Lb ANSI | Centered on Diameter | 165 Lb (74.84 Kg) | 129-066- |
$34,700.00
|
||
![]() |
60" (1524mm) | 23" (584mm) | 23" (584mm) | 140 psi (9.65 bar) | 70 psi (4.83 bar)/161.5' (49.21 m) | 4" X 300 Lb ANSI | Centered on Diameter | 207 Lb (93.89 Kg) | 129-060-HP |
$98,600.00
|
||
![]() |
60" (1524mm) | 28.5" (724mm) | 29" (737mm) | 10 psi (0.7 bar) | 5 psi (0.34 bar)/11.5' (3.5 m) | Through Centering Anchor | End | TBD | 129-060-D |
$98,300.00
|
||
![]() |
60" (1524mm) | 17" (432mm) | 17" (432mm) | 20 psi (1.38 bar) | 10 psi (0.69 bar)/23.1' (7.03 m) | 4" X 300 Lb ANSI | Centered on Diameter | 148 Lb (67.13 Kg) | 129-060- |
$29,000.00
|
||
![]() |
54" (1372mm) | 23" (584mm) | 23" (584mm) | 140 psi (9.65 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 201.5 Lb (91.40 Kg) | 129-054-HP |
$60,900.00
|
||
![]() |
54" (1372mm) | 28.5" (724mm) | 29" (737mm) | 30 psi (2 bar) | 15 psi (1.03 bar)/34.6' (10.6 m) | Through Centering Anchor | End | TBD | 129-054-D |
$70,200.00
|
||
![]() |
54" (1372mm) | 15" (381mm) | 15" (381mm) | 30 psi (2.07 bar) | 15 psi (1.03 bar)/34.6' (10.55 m) | 4" X 300 Lb ANSI | Centered on Diameter | 144 Lb (65.32 Kg) | 129-054- |
$23,400.00
|
||
![]() |
48" (1219mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 152.5 Lb (69.20 Kg) | 129-048-HP |
$55,500.00
|
||
![]() |
48" (1219mm) | 22.75" (578mm) | 23" (584mm) | 30 psi (2 bar) | 15 psi (1.03 bar)/34.6' (10.6 m) | Through Centering Anchor | End | TBD | 129-048-D |
$64,100.00
|
||
![]() |
48" (1219mm) | 15" (381mm) | 15" (381mm) | 30 psi (2.07 bar) | 15 psi (1.03 bar)/34.6' (10.55 m) | 4" X 300 Lb ANSI | Centered on Diameter | 109 Lb (49.44 Kg) | 129-048- |
$21,300.00
|
||
![]() |
42" (1067mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173 ft (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 120 Lb (54.5 Kg) | 129-042-HP |
$40,500.00
|
||
![]() |
42" (1066.8mm) | 22.75" (578mm) | 23" (584mm) | 40 psi (2.7 bar) | 20 psi (1.38 bar)/46.1' (14.1 m) | Through Centering Anchor | End | TBD | 129-042-D |
$58,000.00
|
||
![]() |
42" (1067mm) | 15" (381mm) | 15" (381mm) | 40 psi (2.76 bar) | 20 psi (1.38 bar)/46.1' (14.06 m) | 4" X 300 Lb ANSI | Centered on Diameter | 83 Lb (37.65 Kg) | 129-042- |
$19,300.00
|
||
![]() |
39.37" (1000mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 120 Lb (54.5 Kg) | 129-040-HP |
$38,600.00
|
||
![]() |
40" (1016mm) | 22.75" (578mm) | 23" (584mm) | 40 psi (2.7 bar) | 20 psi (1.38 bar)/46.1' (14.1 m) | Through Centering Anchor | End | TBD | 129-040-D |
$54,400.00
|
||
![]() |
40" (1016mm) | 15" (381mm) | 15" (381mm) | 40 psi (2.76 bar) | 20 psi (1.38 bar)/46.1' (14.06 m) | 4" X 300 Lb ANSI | Centered on Diameter | 83 Lb (37.65 Kg) | 129-040- |
$18,200.00
|
||
![]() |
35.25" (895mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 103.5 Lb (46.95 Kg) | 129-036-HP |
$23,800.00
|
||
![]() |
35.25" (895mm) | 18.8" (478mm) | 19" (483mm) | 50 psi (3.4 bar) | 25 psi (1.72 bar)/57.7' (17.6 m) | Through Centering Anchor | End | TBD | 129-036-D |
$51,000.00
|
||
![]() |
36" (914mm) | 11.75" (298mm) | 11.875" (302mm) | 75 psi (5.17 bar) | 37.5 psi (2.59 bar)/86.5' (26.4 m) | 2" X 300 Lb ANSI | Centered on Diameter | 72 Lb (32.66 Kg) | 129-036- |
$17,000.00
|
||
![]() |
31.75" (806mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 2" X 300 Lb ANSI | Centered on Diameter | 100 Lb (45.4 Kg) | 129-032-HP |
$20,900.00
|
||
![]() |
31.25" (794mm) | 18.8" (478mm) | 19" (483mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | (2) NPT Inflation Ports Internal to Flange | End | TBD | 129-032-D |
$46,400.00
|
||
![]() |
32" (813mm) | 11.75" (298mm) | 11.875" (302mm) | 80 psi (5.51 bar) | 40 psi (2.76 bar)/92.3' (28.1 m) | 2" X 300 Lb ANSI | Centered on Diameter | 62 Lb (28.12 Kg) | 129-032- |
$15,400.00
|
||
![]() |
29.25" (743mm) | 15" (381mm) | 15" (381mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 85.5 Lb (38.78 Kg) | 129-030-HP |
$19,700.00
|
||
![]() |
29.25" (743mm) | 16.8" (427mm) | 17" (432mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | Through Centering Anchor | End | 61 Lb (27.67 Kg) | 129-030-D |
$42,300.00
|
||
![]() |
30" (762mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 2" X 300 Lb ANSI | Centered on Diameter | 61 Lb (27.67 Kg) | 129-030- |
$14,100.00
|
||
![]() |
27.5" (699mm) | 12.5" | 15" (381mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 90 Lb (40.8 Kg) | 129-028-HP |
$18,500.00
|
||
![]() |
27.25" (692.15mm) | 14.8" (376mm) | 17" (432mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | Through Centering Anchor | End | 44 Lb (19.96 Kg) | 129-028-D |
$25,200.00
|
||
![]() |
28" (711mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 2" X 300 Lb ANSI | Centered on Diameter | 60 Lb (27.22 Kg) | 129-028- |
$13,200.00
|
||
![]() |
23.5" (597mm) | 13" (330mm) | 13" (330mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 61.5 Lb (27.90 Kg) | 129-024-HP |
$11,800.00
|
||
![]() |
23.25" (591mm) | 14.8" (376mm) | 15" (381mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | Through Centering Anchor | End | 44 Lb (19.96 Kg) | 129-024-D |
$21,300.00
|
||
![]() |
23.25" (591mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 2" X 300 Lb ANSI | Centered on Diameter | 44 Lb (20 Kg) | 129-024- |
$8,400.00
|
||
![]() |
19.25" (489mm) | 11.75" (298mm) | 11.875" (302mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 35 Lb (15.88 Kg) | 129-020-HP |
$9,000.00
|
||
![]() |
19.25" (489mm) | 14.8" (376mm) | 15" (381mm) | 80 psi (5.5 bar) | 40 psi (2.76 bar)/92.3' (28.1 m) | Through Centering Anchor | End | 135 Lb (15.88 Kg) | 129-020-D |
$18,900.00
|
||
![]() |
19.25" (489mm) | 9.75" (248mm) | 9.875" (251mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 35 Lb (15.88 Kg) | 129-020- |
$6,510.00
|
||
![]() |
17.25" (438mm) | 11.75" (298mm) | 11.813" (300mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 46 Lb (20.87 Kg) | 129-018-HP |
$7,000.00
|
||
![]() |
17.25" (438mm) | 12.7" (323mm) | 13" (330mm) | 80 psi (5.5 bar) | 40 psi (2.76 bar)/92.3' (28.1 m) | Through Centering Anchor | End | 33 Lb (14.97 Kg) | 129-018-D |
$12,900.00
|
||
![]() |
17.25" (438mm) | 9.75" (248mm) | 9.875" (251mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 33 Lb (14.97 Kg) | 129-018- |
$5,040.00
|
||
![]() |
15.25" (387mm) | 11.75" (298mm) | 11.875" (302mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 39 Lb (17.69 Kg) | 129-016-HP |
$5,400.00
|
||
![]() |
15.25" (387mm) | 12.7" (323mm) | 13" (330mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-016-D |
$11,700.00
|
||
![]() |
15.25" (387mm) | 9.75" (248mm) | 9.875" (251mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1.25" X 300 Lb ANSI | Centered on Diameter | 28 Lb (12.70 Kg) | 129-016- |
$3,890.00
|
||
![]() |
13.25" (337mm) | 9.75" (248mm) | 9.875" (251mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 36.5 Lb (16.56 Kg) | 129-014-HP |
$4,830.00
|
||
![]() |
13.25" (336.55mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-014-D |
$10,300.00
|
||
![]() |
13.25" (337mm) | 7.75" (197mm) | 7.875" (200mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1" X 150 Lb ANSI | Centered on Diameter | 26 Lb (11.79 Kg) | 129-014- |
$3,470.00
|
||
![]() |
12" (304.8mm) | 9.75" (248mm) | 9.875" (251mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 36 Lb (16.33 Kg) | 129-012-HP |
$3,260.00
|
||
![]() |
12" (305mm) | 9.75" (248mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-012-D |
$7,800.00
|
|||
![]() |
12" (305mm) | 7.75" (197mm) | 7.875" (200mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 1" X 150 Lb ANSI | Centered on Diameter | 26 Lb (11.79 Kg) | 129-012- |
$2,630.00
|
||
![]() |
10" (254mm) | 7.75" (197mm) | 7.875" (200mm) | 240 psi (16.55 bar) | 120 psi (8.27 bar)/276.8' (84.4 m) | 1.5" Inflation Ram Adapter | Centered on Diameter | 12 Lb (5.44 Kg) | 129-010-HP |
$3,260.00
|
||
![]() |
10" (255mm) | 9.75" (248mm) | 9.875" (251mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-010-D |
$6,930.00
|
||
![]() |
10" (254mm) | 5.75" (146mm) | 5.875" (149mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 1" Inflation Ram Adapter | Centered on Diameter | 11 Lb (4.99 Kg) | 129-010- |
$2,310.00
|
||
![]() |
8" (203mm) | 5.75" (146mm) | 5.875" (149mm) | 240 psi (16.54 bar) | 120 psi (8.27 bar)/276.8' (84.4 m) | 1.5" Inflation Ram Adapter | Centered on Diameter | 12.6 Lb (5.72 Kg) | 129-008-HP |
$2,420.00
|
||
![]() |
8" (203mm) | 7.8" (198mm) | 7.875" (200mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | Through Centering Anchor | End | 9 Lb (4.08 Kg) | 129-008-D |
$6,000.00
|
||
![]() |
8" (203mm) | 5.75" (146mm) | 5.875" (149mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | 1" Inflation Ram Adapter | Centered on Diameter | 9 Lb (4.08 Kg) | 129-008- |
$1,995.00
|
||
![]() |
6" (152mm) | 3.875" (98mm) | 3.875" (98mm) | 230 psi (15.86 bar) | 115 psi (7.93 bar)/265.3' (80.9 m) | 1" Inflation Ram Adapter | Centered on Diameter | 7 Lb (3.18 Kg) | 129-006-HP |
$2,210.00
|
||
![]() |
6" (152.4mm) | 5.8" (147mm) | 5.875"( 149mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | Through Centering Anchor | END | 10 Lb (4.5 Kg) | 129-006-D |
$5,600.00
|
||
![]() |
6" (152mm) | 3.75" (95mm) | 3.875" (98mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-006- |
$1,890.00
|
||
![]() |
4" (101.6mm) | 3.875" (98mm) | 3.875" (98mm) | 200 psi (13.8 bar) | 100 psi (6.89 bar)/230.7' (70.3 m) | 1" Inflation Ram Adapter | Centered on Diameter | 5.6 Lb (2.54 Kg) | 129-004-HP |
$1,890.00
|
||
![]() |
4" (102mm) | 3.75" (95mm) | 3.875" (98mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-004- |
$1,690.00
|
||
![]() |
3" (76mm) | 2.875 (73mm) | 2.875 (73mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7 ft (70.3 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-003-HP |
$1,890.00
|
||
![]() |
3" (76mm) | 2.875" (73mm) | 2.875 (73mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-003- |
$1,680.00
|
||
![]() |
2.5" (63.5mm) | 2.375" (60.33mm) | 2.375" (60.33mm) | 200 psi (13.79 bar) | 230 ft (70.1m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 4 Lbs (1.82 Kg) | 129-0025-HP |
$1,790.00
|
||
![]() |
2.375" (60mm) | 2.375 (60mm) | 160 psi (11.03 bar) | 184 ft (56.08 m) | .25" MNPT WITH 1" RAM ADAPTER | Centered on Diameter | 3 Lb (1.36 Kg) | 129-0025- |
$1,680.00
|
|||
![]() |
2" (51mm) | 1.875" (48mm) | 1.875" (48mm) | 200 psi (13.8 bar) | 100 psi (6.89 bar)/230.7' (70.3 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-002-HP |
$1,790.00
|
||
![]() |
2" (51mm) | 1.75" (44mm) | 1.875" (48mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-002- |
$1,680.00
|
What Problems Can the PeteStop® 129-Series Line Stop Solve?
The Inflatable Line Stop Plugs by Petersen Products are designed to handle some of the most common and difficult pipeline issues that engineers, contractors, and utility personnel encounter. Whether you're working on active pipelines, corroded infrastructure, or in confined locations, the 129-Series offers a versatile and reliable option.
- Works Without Depressurizing the Line - Traditional methods frequently require shutting down a pipeline, which is both costly and time-consuming. The PeteStop® 129-Series lets you to isolate parts of pressurized pipelines without fully depressurizing them, reducing downtime and keeping systems operational.
- Seals Difficult Pipe Conditions - Mechanical stops may struggle with pipes that are out of round or heavily corroded. The inflatable design of the 129-Series conforms to irregular surfaces, making it excellent for aging infrastructure and pipelines including weld beads, scale buildup, or deformation.
- Performs in Tight or Limited-Access Areas - The 129-Series is compact and lightweight, allowing for easy installation even on cramped construction sites. It's ideal for tight spaces or restricted access, such as near bends, offsets, or inside utility vaults.
Each of these problem-solving capabilities saves time, labor, and risk, making the 129-Series a reliable choice for important pipeline maintenance and repair.
Why Choose Inflatable Plug Line Stops Over Mechanical Alternatives?
Inflatable plug line stops, such as the PeteStop® 129-Series, offer significant advantages over typical mechanical stops, particularly in challenging environments.
- Seals Irregular and Damaged Pipes - Inflatable plugs fit into out-of-round, corroded, or welded surfaces where mechanical stops frequently fail to seal properly.
- Reduces Pipe Stress – These inflatable plugs reduce mechanical strain on aged or fragile pipes due to their increased surface area and low insertion pressure.
- Performs Under Pressure - The PeteStop® 129-Series is designed for use in pressurized systems and allows for safe flow isolation without requiring system shutdown or depressurization.
- Lighter, Faster Setup - The lightweight design makes handling and installation easier, saving time and avoiding the need for heavy equipment.
These benefits make inflatable plug line stops the better option for live system maintenance, retrofit works, and pipelines with structural issues.
Common Use Cases for the PeteStop® 129-Series Inflatable Line Stop
Contractors and engineers trust inflatable line stopping when mechanical methods fail or shutdowns are too costly. The PeteStop® 129-Series is particularly useful in the following scenarios:
- Mid-Project Flow Isolation - Maintain pipeline pressure while isolating a section for inspection, repair, or change, without disrupting system operations.
- Temporary Flow Diversion - Using inflatable line stopping, you can safely redirect flow around a work area while bypassing damaged or aging parts.
- Valve Replacement Without Drainage - Replace or repair valves on live lines without having to drain entire systems, saving time and water.
- Hazardous Line Containment - Stop flow safely in lines carrying chemicals or other hazardous materials to reduce risk during an emergency or regular repair.
Every scenario highlights how inflatable line stopping simplifies challenging tasks while ensuring system availability and worker safety.
Request PeteStop® 129-Series Pricing
Looking for a safer, faster, and more cost-effective method to isolate pipeline flow without shutting down your system? The PeteStop® 129-Series inflatable line stop is a flexible solution for contractors, engineers, and utility managers working in challenging conditions. Whether you're replacing valves, managing emergency repairs, or managing aging infrastructure, this solution provides dependable performance while putting less strain on your pipes.
Contact us today to get a price, talk to a product expert, or learn more about how inflatable line stopping can help you with your next project.