Selection Guide - Mechanical Plugs

142-8 Series Item Numbers

1" to 8.03" Well Monitoring Plugs:

Designed to seal monitor wells.

Made with Petroleum resistant Nitrile.

Estimated pressure: 65 psig

142-9 Series Item Numbers

1.5" to 6" Test Caps:

Test caps for several applications.

Made of Polyurethane, ABS or Flexible PVC.

Estimated pressure range: 4.3-17 psig

143-3 Series Item Numbers

1.5" to 6" Galvanized Steel Wing Nut Plugs:

Cost effective way for plugging open ended pipes.

Made with SBR/natural rubber o-ring.

Estimated pressure range: 1-2 psig

143-4 Series Item Numbers

1.5" to 4" Polypropylene End of Pipe Plugs:

Cost effective way for plugging open ended pipes.

Made with Polypropylene construction with a natural rubber o-ring.

Estimated pressure range: 13-22 psig

143-5 Series Item Numbers

.39" to 5" Water Line Stub Plugs:

Ideal for plugging water line stub-outs.

Made with SBR/natural rubber o-ring.

Estimated pressure range: 8-185 psig

143-7 Series Item Numbers

6" to 18" T-Handle Aluminum Test Plugs:

Plugs for long-term applications.

Made with a Neoprene seal.

Estimated pressure range: 8.7-17 psig

143-8 Series Item Numbers

2" to 4" Reinforced Threaded and Hub Plugs:

The Threaded Plug is a cost effective way to seal any damaged threads. The Hub Test Plugs are ideal for use in hub fittings and in bell-end pipes.

Made with a natural rubber o-ring seal as well as reinforced ABS & SS threaded plugs, glass reinforced ABS plastic and stainless steel hardware.

Estimated pressure range: 13-17 psig

143-9 Series Item Numbers

1.48" to 8.03" Reinforced ABS Wing Nut Plugs:

Ideal for sewer testing and long-term applications.

Made with a natural rubber o-ring and glass reinforced ABS plastic.

Estimated pressure: 17 psig

144-1 Series Item Numbers

1.48" to 4.06" High Impact ABS Wing Nut Plugs:

Ideal for sewer testing and long-term applications.

Made with a neoprene rubber o-ring and high impact ABS material.

Estimated pressure: 5 psig

146-Series Item Numbers

28" to 10.50" Bolt Type Mechanical Pipe Plugs, Medium Pressure With By-Pass

Simple, reliable testing of a pipeline. Designed for simple, reliable testing of pipe and tubing to 250 psig, without tube wall damage associated with other test plugs.

Made with a Neoprene rubber seal and plated carbon steel body. These plugs may also be produced custom to most size, pressure, and chemical requirements.

Standard estimated pressure range: 10-250 psig

147-Series Item Numbers

.53" to 24" Mechanical High Pressure Test Plugs:

High Pressure Test Plugs use the test pressure to help seal more securely against the pipe's inner diameter. Typical Applications: Force and water main, lift stations, nuclear cooling lines, fire protection lines, special plant situations, irrigation supply lines, and many other projects.

Made with Urethane or Neoprene.

Estimated pressure range: 720-11,100 psig

149-1 Series Item Numbers

1 1/2" to 12.7" Mechanical Test Plugs With By-Pass:

This heavy duty plug is ideal for sealing and testing a variety of pipe sizes. The Single Mechanical Test Plugs have a hollow stem so they may be used for filling or testing of drains and other pipelines.

Made with SBR/natural rubber seals.

Estimated pressure range: 5-25 psig

149-2 Series Item Numbers

1 1/2" to 8.25" Mechanical Test Plugs, Double:

Ideal for sealing and testing a variety of pipe sizes. The Double Mechanical Test Plug does the job of three plugs and are ideal for use in plugging both wye connections. The sizing must be more exact than inflatable plugs but they are often less expensive.

Made with molded pure rubber.

Estimated pressure range: 5-25 psig

148-0 Series Item Numbers

1/2" to 4" EZ-Swet Mechanical Line Stopper Plugs:

Solder without draining the entire water system. With this plug, you can go into any situation and have immediate control of the water system. No waiting for water to completely drain.

Made with molded Silicon/EPDM composite rubber seal.

142-Series Item Numbers

3 3/4" to 19" Hand Tightening nylon Body Test Plugs:

Extremely versatile and cost effective expansion plugs for many applications. No parts to corrode. Plugs may convert into a low pressure test or by-pass plug and by-pass to by-pass. By-pass is a standard feature on 10", 12", 15", and 18" diameter.

Made with Polyisoprene rubber construction seals.

Estimated pressure: 5 psig

143-0 Series Item Numbers

1 1/2" to 4" Mechanical Hand Tightening Test Plugs:

Economical PVC pipe plugs for many applications. Available with or without hollow stem and tire type valve for easy testing. Soft PVC gasket creates air tight seal.

Made with soft PVC seals.

Estimated blowout ratings range from 8-65 psig

141-Series Item Numbers

144-Series Item Numbers

Low cost plug for very low pressure test or temporary closure. Durable cast aluminum - heavy duty, non-corrosive and maintenance-free; with natural rubber seals.

Made with NBR/natural rubber seals.

144-Series Item Numbers

1/2" to 6" Mechanical Low Pressure nylon Plugs:

Used for a wide variety of industrial applications. These superior, versatile, expandable pipe plugs are used to accommodate a wide variety of industrial applications where an air tight seal is required.

Made with NBR/natural rubber seals.

145-9 Series Item Numbers

2.469" to 144" Mechanical High Pressure Test Plugs:

This Mechanical Plug can be configured to specific job requirements with almost any pressure, chemical, or temperature requirements. It is available with a solid rubber seal or an inflatable seal. Easy installation, replaceable seals, lightweight, positive seal, and anchor set screws if needed to anchor against line pressure.

Made with solid rubber Nitrile seals.

Estimated pressure: 100 psig

145-8 Series Item Numbers

24" to 120" Pipeline Joint Testers:

These joint testers are fast, safe, and easy to use.

These testers are made with natural rubber.

Estimated air pressure: 15 psig

Estimated water pressure: 50 psig

148-3 Series Item Numbers

0.57" to 2" Remote Expander Plugs:

Typical uses include blocking pipelines against tampering and gas theft, testing pipelines for leakage, and testing intermediate pressure regulators.

Made with a Nitrile rubber seal.

143-1 Series Item Numbers

3/8" to 4" Lever Type Expandable Rubber Plugs:

Extremely versatile and cost effective expansion plugs for many applications. Brass lever type handle provides an excellent grip to fasten the plug into a hole.

Made with Neoprene rubber.

143-2 Series Item Numbers

1/2" to 4" T-Handle Expandable Rubber Plugs:

Extremely versatile and cost effective expansion plugs for many applications. Brass lever type handle provides an excellent grip to fasten the plug into a hole.

Made with Neoprene rubber.

140-Series Item Numbers

6" to 60" Pipe Protector Plugs: Bell End: Spigot End:

This Polyethylene Pipe Protector Plug is used for keeping the inside diameter clean. This Plug has a rubber seal that can be simply inserted in the end of the pipe for fast easy protection from water, sand, animals, and almost anything else.

Made with a natural rubber gasket.

140-4 & 140-5 Series Item Numbers

1.5" to 4" Flush Mounted Plugs:

Use in areas of heavy traffic areas such as driveways, doorways, sidewalks, or warehouse floor drains where heavy machinery can be driven over it. Commonly used where carpeting will be laid over a clean out as in an office or finished basement.

This plug has a neoprene gasket.